PRM110 Laird Connectivity component image

PRM110

In Stock

Laird Connectivity logo Laird Connectivity · franchised distributor

RX TXRX MOD ISM > 1GHZ U.FL SMD

Listed in RF Transceiver Modules and Modems

2,684 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PRM110?

PRM110 is a rx txrx mod ism > 1ghz u.fl smd, featuring a frequency of 2.4GHz, the Module case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Laird Connectivity Series Variants in Stock

36 variants of this series in stock
Part Number Description Stock Unit Price Status
DVK-PRM121 DEV KIT PRM121 4,192 RFQ In Stock
ACC-004 BOARD CARRIER BISMS02BI FOR KIT 2,372 RFQ In Stock
ACC-007 BOARD CODEC MULTICH OKI 7705 4,251 RFQ In Stock
BISDK02BI-03 KIT BISM II BLUETOOTH/802.11B/G 4,855 RFQ In Stock
DVK-PRM110 KIT DEVELOPMENT FOR LT2510 U.FL 1,361 RFQ In Stock
DVK-PRM120 DEV KIT PRM120 1,897 RFQ In Stock
DVK-PRM123 DEV KIT PRM123 641 RFQ In Stock
BISDK02BI-02 KIT BISM II BLUETOOTH USB II 2,311 RFQ In Stock
DVK-PRM113 KIT FOR PRM113 1,347 RFQ In Stock
DVK-PRM111 KIT DEVELOPMENT FOR LT2510 ANT 635 RFQ In Stock
+ 26 more variants in stock — browse the full category

Technical Parameters

PRM110 Specifications

Series FlexRF™
Package Bulk
Part Status Obsolete
RF Family/Standard General ISM > 1GHZ
Protocol -
Modulation FHSS
Frequency 2.4GHz
Data Rate 500kbps
Power - Output 21dBm
Sensitivity -98dBm
Serial Interfaces UART
Antenna Type Antenna Not Included, U.FL
Utilized IC / Part -
Memory Size -
Voltage - Supply 3.3V
Current - Receiving 10mA
Current - Transmitting 180mA
Mounting Type Surface Mount
Operating Temperature -40°C ~ 85°C
Package / Case Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
XPC100200S-01 RX TXRX MODULE SURFACE MOUNT 214 $29.9900 100%
XPC10010MB-01 RX TXRX MODULE SURFACE MOUNT 251 $22.9900 100%
XPC100100B-01 RX TXRX MODULE SURFACE MOUNT 257 $23.4400 100%
XPC100100S-01 RX TXRX MODULE SURFACE MOUNT 201 $30.4600 100%
SC14CVMDECT SF02T RX TXRX MOD ISM > 1GHZ CHIP SMD 333 $16.6700 85%
PRM111 RX TXRX MOD ISM > 1GHZ CHIP SMD 3,686 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Laird Connectivity Parts in Stock

Request a Quote

Need PRM110 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.