PLS62-W Rel.1 Thales DIS (Formerly Gemalto) component image

PLS62-W Rel.1

In Stock

Thales DIS (Formerly Gemalto) logo Thales DIS (Formerly Gemalto) · franchised distributor

RF TXRX MOD CELL LTE GLOBAL SMD

Listed in RF Transceiver Modules and Modems

116 pcs in stock ships same day before 6pm

from $65.4500

Quantity Unit Price
1+ $65.4500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PLS62-W Rel.1?

PLS62-W-Rel-1 is a rf txrx mod cell lte global smd, featuring a frequency of 700MHz, 800MHz, 850MHz, 900MHz, AWS1, 1.8GHz, 1.9GHz, 2.1GHz, 2.6GHz, the 156-LGA Module case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Thales DIS (Formerly Gemalto) Series Variants in Stock

2 variants of this series in stock
Part Number Description Stock Unit Price Status
EVAL PLS62-W Rel.1 EVALUATION MODULE CELLULAR 83 $102.0000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

PLS62-W Rel.1 Specifications

Series Cinterion PLS62
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
RF Family/Standard Cellular
Protocol EDGE, GPRS, GSM, HSPA+, LTE, UMTS, WCDMA
Modulation 64-QAM
Frequency 700MHz, 800MHz, 850MHz, 900MHz, AWS1, 1.8GHz, 1.9GHz, 2.1GHz, 2.6GHz
Data Rate 10.2Mbps
Power - Output 33dBm
Sensitivity -
Serial Interfaces ADC, GPIO, I²C, I²S, PCM, SPI, UART, USB
Antenna Type Antenna Not Included
Utilized IC / Part Intel XMM 7160
Memory Size 31MB Flash, 18MB RAM
Voltage - Supply 3V ~ 4.5V
Current - Receiving -
Current - Transmitting -
Mounting Type Surface Mount
Operating Temperature -40°C ~ 90°C
Package / Case 156-LGA Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Thales DIS (Formerly Gemalto) Parts in Stock

Request a Quote

Need PLS62-W Rel.1 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.