PFS35-4R7F1 Riedon component image

PFS35-4R7F1

In Stock

Riedon logo Riedon · franchised distributor

RES SMD 4.7OHM 1% 35W TO263 DPAK

Listed in Chip Resistor - Surface Mount

2,703 pcs in stock ships same day before 6pm

from $1.8792

Quantity Unit Price
1 - 499 $1.8792 BEST
500+ $1.8792 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PFS35-4R7F1?

PFS35-4R7F1 is a res smd 4.7ohm 1% 35w to263 dpak, featuring a power rating of 35W, a tolerance of ±1%, a Thin Film composition, and the Non-Standard D-PAK case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Riedon Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
PFS35-750RF1 RES SMD 750OHM 1% 35W TO263 DPAK 2,695 $1.8792 In Stock
PFS35-1K3F1 RES SMD 1.3KOHM 1% 35W TO263DPAK 2,707 $1.8792 In Stock
PFS35-300RF1 RES SMD 300OHM 1% 35W TO263 DPAK 2,694 $1.8792 In Stock
PFS35-20RF1 RES SMD 20 OHM 1% 35W TO263 DPAK 1,419 $3.6300 In Stock
PFS35-5R6F1 RES SMD 5.6OHM 1% 35W TO263 DPAK 2,703 $1.8792 In Stock
PFS35-56RF1 RES SMD 56 OHM 1% 35W TO263 DPAK 2,706 $1.8792 In Stock
PFS35-39RF1 RES SMD 39 OHM 1% 35W TO263 DPAK 2,706 $1.8792 In Stock
PFS35-0R5F1 RES 0.5 OHM 1% 35W TO263 DPAK 2,702 $1.8792 In Stock
PFS35-0R27F1 RES 0.27 OHM 1% 35W TO263 DPAK 2,707 $1.8792 In Stock
PFS35-200RF1 RES SMD 200OHM 1% 35W TO263 DPAK 2,706 $1.8792 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

PFS35-4R7F1 Specifications

Series PFS35
Package Tape & Reel (TR)
Part Status Active
Resistance 4.7 Ohms
Tolerance ±1%
Power (Watts) 35W
Composition Thin Film
Features Current Sense, Pulse Withstanding
Temperature Coefficient ±100ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case Non-Standard D-PAK
Supplier Device Package D-Pak in TO-263 Housing
Ratings -
Size / Dimension 0.406" L x 0.398" W (10.30mm x 10.10mm)
Height - Seated (Max) 0.185" (4.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
PFS35-5RF1 RES SMD 5 OHM 1% 35W TO263 DPAK 1,425 $3.6300 96%
PFS35-5R1F1 RES SMD 5.1OHM 1% 35W TO263 DPAK 2,701 $1.8792 95%
PFS35-4R3F1 RES SMD 4.3OHM 1% 35W TO263 DPAK 2,699 $1.8792 95%
PFS35-5R6F1 RES SMD 5.6OHM 1% 35W TO263 DPAK 2,703 $1.8792 89%
PFS35-3R9F1 RES SMD 3.9OHM 1% 35W TO263 DPAK 2,709 $1.8792 89%
PFS35-3R6F1 RES SMD 3.6OHM 1% 35W TO263 DPAK 2,692 $1.8792 84%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Riedon Parts in Stock

Request a Quote

Need PFS35-4R7F1 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.