PDTC114EQAZ Nexperia component image

PDTC114EQAZ

In Stock

Nexperia logo Nexperia · franchised distributor

TRANS PREBIAS NPN 3DFN

Listed in Transistors - Bipolar (BJT) - Single, Pre-Biased

138,535 pcs in stock ships same day before 6pm

from $0.0361

Quantity Unit Price
1 - 4,999 $0.0361 BEST
5,000+ $0.0361 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PDTC114EQAZ?

PDTC114EQAZ is a trans prebias npn 3dfn, featuring a NPN - Pre-Biased type, a V(BR)CEO of 50 V, a max collector current of 100 mA, and a gain (hFE) of 30 @ 5mA, 5V. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Nexperia Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
PDTC114ET/DG/B2215 SMALL SIGNAL BIPOLAR TRANSISTOR 250,038 $0.0200 In Stock
PDTC144EQAZ TRANS PREBIAS NPN 3DFN 138,546 $0.0361 In Stock
PDTC124EQAZ TRANS PREBIAS NPN 3DFN 138,540 $0.0361 In Stock
PDTC143EQAZ PDTC143/114/124/144EQA SERIES - 250,035 $0.0200 In Stock
PDTC114EQA147 SMALL SIGNAL BIPOLAR TRANSISTOR 250,031 $0.0200 In Stock
PDTC124EQA147 SMALL SIGNAL BIPOLAR TRANSISTOR 250,041 $0.0200 In Stock
PDTC144EQA147 SMALL SIGNAL BIPOLAR TRANSISTOR 250,040 $0.0200 In Stock
PDTC143EQA147 SMALL SIGNAL BIPOLAR TRANSISTOR 250,036 $0.0200 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

PDTC114EQAZ Specifications

Series Automotive, AEC-Q101
Package Tape & Reel (TR)
Part Status Active
Transistor Type NPN - Pre-Biased
Current - Collector (Ic) (Max) 100 mA
Voltage - Collector Emitter Breakdown (Max) 50 V
Resistor - Base (R1) 10 kOhms
Resistor - Emitter Base (R2) 10 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce 30 @ 5mA, 5V
Vce Saturation (Max) @ Ib, Ic 150mV @ 500µA, 10mA
Current - Collector Cutoff (Max) 1µA
Frequency - Transition 230 MHz
Power - Max 280 mW
Mounting Type Surface Mount
Package / Case 3-XDFN Exposed Pad
Supplier Device Package DFN1010D-3

Buying Guide

Choosing Discrete Semiconductor Products

Qualifying a discrete semiconductor means checking worst-case, not typical, numbers. For diodes: reverse voltage at maximum temperature, forward drop at your actual current, and surge rating for inrush events. For BJTs: collector current and power at the real heatsink conditions, gain (hFE) at your operating current — the minimum column, not typical — and saturation voltage for switching duty. For MOSFETs: Rds(on) at your junction temperature (it roughly doubles from 25°C to 100°C) and gate threshold vs your drive voltage; logic-level parts need 4.5 V rating for 5 V drive. Always verify the safe operating area (SOA) curve for linear applications, and derate reverse voltage 20–30% for reliability. For ESD-exposed nodes, add TVS devices rated below the protected pin's absolute maximum.

Same Manufacturer

Nexperia Parts in Stock

Request a Quote

Need PDTC114EQAZ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.