PAT1632-C-2DB-T1 Susumu component image

PAT1632-C-2DB-T1

In Stock

Susumu logo Susumu · franchised distributor

CHIP ATTENUATOR, 2DB, 50O, 125MW

Listed in Attenuators

1,731 pcs in stock ships same day before 6pm

from $2.9400

Quantity Unit Price
1+ $2.9400 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the PAT1632-C-2DB-T1?

PAT1632-C-2DB-T1 is a chip attenuator, 2db, 50o, 125mw, featuring the 1206 (3216 Metric) case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Susumu Series Variants in Stock

44 variants of this series in stock
Part Number Description Stock Unit Price Status
PAT0510S-C-5DB-T10 RF ATTENUATOR 5DB 50OHM 0402 45,500 $0.1100 In Stock
PAT0510S-C-10DB-T10 RF ATTENUATOR 10DB 50OHM 0402 45,498 $0.1100 In Stock
PAT0510S-C-0DB-T10 RF ATTENUATOR 0DB 50OHM 0402 45,496 $0.1100 In Stock
PAT1632-C-0DB-T1 CHIP ATTENUATOR, 0DB, 50O, 125MW 1,735 $2.9400 In Stock
PAT0510S-C-9DB-T10 RF ATTENUATOR 9DB 50OHM 0402 105,855 $0.0473 In Stock
PAT0816-C-8DB-T5 CHIP ATTENUATOR, 8DB, 50O, 64MW, 15,194 $0.3300 In Stock
PAT0816-C-9DB-T5 CHIP ATTENUATOR, 9DB, 50O, 64MW, 15,181 $0.3300 In Stock
PAT0510S-C-3DB-T10 RF ATTENUATOR 3DB 50OHM 0402 45,498 $0.1100 In Stock
PAT1632-C-3DB-T1 CHIP ATTENUATOR, 3DB, 50O, 125MW 1,730 $2.9400 In Stock
PAT0510S-C-1DB-T10 RF ATTENUATOR 1DB 50OHM 0402 45,492 $0.1100 In Stock
+ 34 more variants in stock — browse the full category

Technical Parameters

PAT1632-C-2DB-T1 Specifications

Series PAT
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Attenuation Value 2dB
Frequency Range 0 Hz ~ 3.0 GHz
Power (Watts) 125mW
Impedance 50 Ohms
Package / Case 1206 (3216 Metric)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
PAT1632-C-0DB-T1 CHIP ATTENUATOR, 0DB, 50O, 125MW 1,735 $2.9400 100%
PAT1632-C-3DB-T1 CHIP ATTENUATOR, 3DB, 50O, 125MW 1,730 $2.9400 100%
PAT1632-C-1DB-T1 CHIP ATTENUATOR, 1DB, 50O, 125MW 1,739 $2.9400 100%
PAT1632-C-9DB-T1 CHIP ATTENUATOR, 9DB, 50O, 125MW 1,733 $2.9400 100%
PAT1632-C-6DB-T1 ATTENUATOR 6 DB 50 OHM 1206 SMD 1,736 $2.9400 100%
PAT1632-C-10DB-T1 CHIP ATTENUATOR, 10DB, 50O, 125M 1,740 $2.9400 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Susumu Parts in Stock

Request a Quote

Need PAT1632-C-2DB-T1 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.