OPA725AIDBVR Rochester Electronics component image

OPA725AIDBVR

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

OPA725 SINGLE LOW NOISE, HIGH-SP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

3,698 pcs in stock ships same day before 6pm

from $1.2838

Quantity Unit Price
1 - 2,999 $1.3700
3,000+ $1.2838 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA725AIDBVR?

OPA725AIDBVR is a opa725 single low noise, high-sp, featuring the SC-74A, SOT-753 package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

2 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA2725AIDGKR OPA2725 DUAL LOW NOISE, HIGH-SPE 2,005 $2.5400 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OPA725AIDBVR Specifications

Series -
Package Bulk
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 30V/µs
Gain Bandwidth Product 20 MHz
-3db Bandwidth -
Current - Input Bias 30 pA
Voltage - Input Offset 1.2 mV
Current - Supply 4.3mA
Current - Output / Channel 40 mA
Voltage - Supply, Single/Dual (±) 4V ~ 12V, ±2V ~ 6V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Supplier Device Package SOT-23-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TSX561ILT IC CMOS 1 CIRCUIT SOT23-5 5,729 $0.8800 100%
OPA725AIDBVT IC OPAMP GP 1 CIRCUIT SOT23-5 1,729 $2.9600 100%
AD8005ARTZ-REEL7 IC OPAMP CFA 1 CIRCUIT SOT23-5 1,286 $4.0200 100%
OPA725AIDBVRG4 IC OPAMP GP 1 CIRCUIT SOT23-5 3,278 $1.5431 100%
TSX561IYLT IC OPAMP GP 1 CIRCUIT SOT23-5 4,752 $1.0600 100%
TLV2371IDBVT IC OPAMP GP 1 CIRCUIT SOT23-5 3,232 $1.5700 95%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need OPA725AIDBVR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.