OPA564AIDWPR Texas Instruments component image

OPA564AIDWPR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT 20SOPWRPAD

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

776 pcs in stock ships same day before 6pm

from $3.2186

Quantity Unit Price
1 - 1,999 $6.8000
2,000+ $3.2186 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA564AIDWPR?

OPA564AIDWPR is a ic opamp gp 1 circuit 20sopwrpad, featuring the 20-SOIC (0.295", 7.50mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

4 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA564AIDWP IC OPAMP GP 1 CIRCUIT 20SOPWRPAD 731 $7.3300 In Stock
OPA564AIDWDR IC OPAMP GP 1 CIRCUIT 20HSOP 781 $6.8000 In Stock
OPA564AIDWD IC OPAMP GP 1 CIRCUIT 20HSOP 722 $7.3300 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OPA564AIDWPR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 40V/µs
Gain Bandwidth Product 17 MHz
-3db Bandwidth -
Current - Input Bias 10 pA
Voltage - Input Offset 2 mV
Current - Supply 39mA
Current - Output / Channel 1.5 A
Voltage - Supply, Single/Dual (±) 7V ~ 24V, ±3.5V ~ 12V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295", 7.50mm Width) Exposed Pad
Supplier Device Package 20-SO PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OPA564AIDWDR IC OPAMP GP 1 CIRCUIT 20HSOP 781 $6.8000 100%
OPA564AQDWPRQ1 IC OPAMP GP 1 CIRCUIT 20SOPWRPAD 740 $7.2200 100%
OPA564AIDWP IC OPAMP GP 1 CIRCUIT 20SOPWRPAD 731 $7.3300 100%
OPA564AIDWD IC OPAMP GP 1 CIRCUIT 20HSOP 722 $7.3300 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA564AIDWPR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.