OPA552FAKTWT Texas Instruments component image

OPA552FAKTWT

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT DDPAK

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

796 pcs in stock ships same day before 6pm

from $3.5789

Quantity Unit Price
1 - 249 $6.6900
250 - 499 $4.5067
500 - 1,249 $4.1091
1,250+ $3.5789 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA552FAKTWT?

OPA552FAKTWT is a ic opamp gp 1 circuit ddpak, featuring the TO-263-8, D²Pak (7 Leads + Tab), TO-263CA package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA551UA/2K5 IC OPAMP GP 1 CIRCUIT 8SOIC 1,098 $4.7000 In Stock
OPA552FAKTWTG3 IC OPAMP GP 1 CIRCUIT DDPAK 778 $6.6900 In Stock
OPA551UAG4 IC OPAMP GP 1 CIRCUIT 8SOIC 1,149 $4.4792 In Stock
OPA551FAKTWT IC OPAMP GP 1 CIRCUIT DDPAK 696 $7.7100 In Stock
OPA552PA IC OPAMP GP 1 CIRCUIT 8DIP 1,051 $4.9700 In Stock
OPA551FA/500G3 IC OPAMP GP 1 CIRCUIT DDPAK 762 $7.0100 In Stock
OPA551PAG4 IC OPAMP GP 1 CIRCUIT 8DIP 1,195 $4.3200 In Stock
OPA552FA/500 IC OPAMP GP 1 CIRCUIT DDPAK 791 $6.5800 In Stock
OPA551UA IC OPAMP GP 1 CIRCUIT 8SOIC 867 $6.0900 In Stock
OPA552UA IC OPAMP GP 1 CIRCUIT 8SOIC 997 $5.1900 In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

OPA552FAKTWT Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 24V/µs
Gain Bandwidth Product 12 MHz
-3db Bandwidth -
Current - Input Bias 20 pA
Voltage - Input Offset 1 mV
Current - Supply 7mA
Current - Output / Channel 200 mA
Voltage - Supply, Single/Dual (±) 8V ~ 60V, ±4V ~ 30V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-8, D²Pak (7 Leads + Tab), TO-263CA
Supplier Device Package DDPAK/TO-263-7

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OPA547F/500G3 IC OPAMP GP 1 CIRCUIT DDPAK 483 $11.2600 100%
OPA551FA/500G3 IC OPAMP GP 1 CIRCUIT DDPAK 762 $7.0100 100%
OPA547FKTWTG3 IC OPAMP GP 1 CIRCUIT DDPAK 401 $13.7500 100%
OPA552FA/500 IC OPAMP GP 1 CIRCUIT DDPAK 791 $6.5800 100%
OPA551FAKTWT IC OPAMP GP 1 CIRCUIT DDPAK 696 $7.7100 100%
OPA547F/500 IC OPAMP GP 1 CIRCUIT DDPAK 493 $11.2600 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA552FAKTWT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.