OPA445AP Texas Instruments component image

OPA445AP

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

437 pcs in stock ships same day before 6pm

from $7.9549

Quantity Unit Price
1 - 9 $12.5600
10 - 49 $11.5435
50 - 99 $11.0651
100 - 499 $9.7492
500 - 999 $8.6726
1,000+ $7.9549 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA445AP?

OPA445AP is a ic opamp gp 1 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA445ADDAR IC OPAMP GP 1 CIRCUIT 8SOPWRPAD 747 $6.9806 In Stock
OPA445AUG4 IC OPAMP GP 1 CIRCUIT 8SOIC 459 $12.0600 In Stock
OPA445APG4 IC OPAMP GP 1 CIRCUIT 8DIP 494 $11.0660 In Stock
OPA445AU IC OPAMP GP 1 CIRCUIT 8SOIC 457 $12.0600 In Stock
OPA445BM IC OPAMP GP 1 CIRCUIT TO99-8 241 $25.5300 In Stock
OPA445ADDA IC OPAMP GP 1 CIRCUIT 8SOPWRPAD 481 $11.1700 In Stock
OPA445AU/2K5 IC OPAMP GP 1 CIRCUIT 8SOIC 752 $6.9806 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OPA445AP Specifications

Series -
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 15V/µs
Gain Bandwidth Product 2 MHz
-3db Bandwidth -
Current - Input Bias 10 pA
Voltage - Input Offset 1.5 mV
Current - Supply 4.2mA
Current - Output / Channel 15 mA
Voltage - Supply, Single/Dual (±) 20V ~ 90V, ±10V ~ 45V
Operating Temperature -25°C ~ 85°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OPA445APG4 IC OPAMP GP 1 CIRCUIT 8DIP 494 $11.0660 100%
HA3-2505-5 HIGH INPUT IMPEDANCE OP AMP 1,978 $2.5900 95%
HA3-2605-5 HIGH INPUT IMPEDANCE OP AMP 1,743 $2.9500 95%
CA1458ES2064 OPERATIONAL AMPLIFIER FOR COMMER 41,707 $0.1200 85%
CA1458EX OPERATIONAL AMPLIFIER 16,703 $0.3000 85%
CA0301AEX OPERATIONAL AMPLIFIER 18,560 $0.2700 85%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA445AP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.