OPA376AIDCKRG4 Texas Instruments component image

OPA376AIDCKRG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 1 CIRCUIT SC70-5

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

5,282 pcs in stock ships same day before 6pm

from $0.9552

Quantity Unit Price
1 - 2,999 $0.9552 BEST
3,000+ $0.9552 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA376AIDCKRG4?

OPA376AIDCKRG4 is a ic opamp gp 1 circuit sc70-5, featuring the 5-TSSOP, SC-70-5, SOT-353 package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

13 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA2376AIDRG4 IC OPAMP GP 2 CIRCUIT 8SOIC 3,612 $1.3961 In Stock
OPA2376AIDGKT IC OPAMP GP 2 CIRCUIT 8VSSOP 1,694 $3.0100 In Stock
MCP6V26T-E/MNY IC OPAMP ZERO-DRIFT 1 CIRC 8TDFN 4,135 $1.2200 In Stock
OPA2376AIDGKRG4 IC OPAMP GP 2 CIRCUIT 8VSSOP 3,614 $1.3961 In Stock
OPA2376AIYZDR IC OPAMP GP 2 CIRCUIT 8DSBGA 1,963 $2.6100 In Stock
OPA376AIDCKR IC OPAMP GP 1 CIRCUIT SC70-5 2,836 $1.7900 In Stock
OPA2376AID IC OPAMP GP 2 CIRCUIT 8SOIC 1,818 $2.8200 In Stock
OPA2376AIDGKR IC OPAMP GP 2 CIRCUIT 8VSSOP 1,953 $2.6100 In Stock
OPA2376AIDR IC OPAMP GP 2 CIRCUIT 8SOIC 1,952 $2.6100 In Stock
OPA376AIDCKT IC OPAMP GP 1 CIRCUIT SC70-5 2,476 $2.0600 In Stock
+ 3 more variants in stock — browse the full category

Technical Parameters

OPA376AIDCKRG4 Specifications

Series e-trim™
Package Tape & Reel (TR)
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 2V/µs
Gain Bandwidth Product 5.5 MHz
-3db Bandwidth -
Current - Input Bias 0.2 pA
Voltage - Input Offset 5 µV
Current - Supply 760µA
Current - Output / Channel 50 mA
Voltage - Supply, Single/Dual (±) 2.2V ~ 5.5V, ±1.1V ~ 2.75V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 5-TSSOP, SC-70-5, SOT-353
Supplier Device Package SC-70-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OPA376AIDCKR IC OPAMP GP 1 CIRCUIT SC70-5 2,836 $1.7900 100%
OPA376AIDCKT IC OPAMP GP 1 CIRCUIT SC70-5 2,476 $2.0600 100%
OPA376AIDCKTG4 IC OPAMP GP 1 CIRCUIT SC70-5 4,135 $1.2206 100%
ISL28130CEZ-T7A IC OPAMP GP 1 CIRCUIT SC70-5 2,941 $1.7200 91%
ISL28130FEZ-T7A IC OPAMP GP 1 CIRCUIT SC70-5 2,534 $2.0000 91%
ISL28130FEZ-T7 IC OPAMP GP 1 CIRCUIT SC70-5 3,292 $1.5400 91%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA376AIDCKRG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.