OPA2726AIDGST Texas Instruments component image

OPA2726AIDGST

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 2 CIRCUIT 10VSSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,011 pcs in stock ships same day before 6pm

from $2.8275

Quantity Unit Price
1 - 249 $5.1800
250 - 499 $3.7050
500 - 1,249 $3.3345
1,250+ $2.8275 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA2726AIDGST?

OPA2726AIDGST is a ic opamp gp 2 circuit 10vssop, featuring the 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

12 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA725AID IC OPAMP GP 1 CIRCUIT 8SOIC 1,652 $3.1000 In Stock
OPA2725AIDR IC OPAMP GP 2 CIRCUIT 8SOIC 1,072 $4.8100 In Stock
OPA2725AID IC OPAMP GP 2 CIRCUIT 8SOIC 908 $5.7700 In Stock
OPA726AIDGKTG4 IC OPAMP GP 1 CIRCUIT 8VSSOP 1,991 $2.5572 In Stock
OPA725AIDBVT IC OPAMP GP 1 CIRCUIT SOT23-5 1,729 $2.9600 In Stock
OPA2726AIDGSR IC OPAMP GP 2 CIRCUIT 10VSSOP 1,227 RFQ In Stock
OPA726AIDGKT IC OPAMP GP 1 CIRCUIT 8VSSOP 1,475 $3.4600 In Stock
OPA2725AIDGKT IC OPAMP GP 2 CIRCUIT 8VSSOP 951 $5.5200 In Stock
OPA2726AIDGSRG4 IC OPAMP GP 2 CIRCUIT 10VSSOP 2,744 RFQ In Stock
OPA725AIDBVRG4 IC OPAMP GP 1 CIRCUIT SOT23-5 3,278 $1.5431 In Stock
+ 2 more variants in stock — browse the full category

Technical Parameters

OPA2726AIDGST Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type CMOS
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 30V/µs
Gain Bandwidth Product 20 MHz
-3db Bandwidth -
Current - Input Bias 30 pA
Voltage - Input Offset 1.5 mV
Current - Supply 4.3mA (x2 Channels)
Current - Output / Channel 40 mA
Voltage - Supply, Single/Dual (±) 3.5V ~ 12V, ±1.75V ~ 6V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package 10-VSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
BUF04701AIDGS BUFFER AMPLIFIER, 4 FUNC PDSO10 5,787 $0.8700 100%
OPA2726AIDGSTG4 IC OPAMP GP 2 CIRCUIT 10VSSOP 1,346 $3.8318 100%
TLV2373IDGS TLV2373 DUAL 550-UA/CHANNEL, 3MH 3,858 $1.3100 99%
TLV2373IDGSRG4 IC OPAMP GP 2 CIRCUIT 10VSSOP 4,110 $1.2258 99%
TLV2373IDGSR IC OPAMP GP 2 CIRCUIT 10VSSOP 2,220 $2.3000 99%
OPA2726AIDGSR IC OPAMP GP 2 CIRCUIT 10VSSOP 1,227 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA2726AIDGST or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.