OPA2604AP Texas Instruments component image

OPA2604AP

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 2 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,805 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA2604AP?

OPA2604AP is a ic opamp gp 2 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Texas Instruments Series Variants in Stock

4 variants of this series in stock
Part Number Description Stock Unit Price Status
THS4552IRTWR IC OPAMP DIFF 2 CIRCUIT 24WQFN 934 $5.5700 In Stock
OPA2380AIDGKR IC OPAMP TRANSIMP 2 CIRC 8VSSOP 850 $6.1800 In Stock
OPA2380AIDGKRG4 IC OPAMP TRANSIMP 2 CIRC 8VSSOP 1,395 $3.6740 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OPA2604AP Specifications

Series Automotive, AEC-Q100
Package Tube
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 2
Output Type Differential
Slew Rate 25V/µs
Gain Bandwidth Product 20 MHz
-3db Bandwidth -
Current - Input Bias 100 pA
Voltage - Input Offset 1 mV
Current - Supply 10.5mA (x2 Channels)
Current - Output / Channel 35 mA
Voltage - Supply, Single/Dual (±) 9V ~ 48V, ±4.5V ~ 24V
Operating Temperature -25°C ~ 85°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OPA604APG4 IC OPAMP GP 1 CIRCUIT 8DIP 2,095 $2.4434 100%
OPA604AP IC OPAMP GP 1 CIRCUIT 8DIP 1,476 $3.5000 100%
LF412CN/NOPB IC OPAMP JFET 2 CIRCUIT 8DIP 3,082 $1.6400 97%
LM318PG4 IC OPAMP GP 1 CIRCUIT 8DIP 4,364 $1.1575 97%
LM318P IC OPAMP GP 1 CIRCUIT 8DIP 2,606 $1.9500 97%
LM318P3 OPERATIONAL AMPLIFIER 17,279 $0.2900 97%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA2604AP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.