OPA2375IDSGR Texas Instruments component image

OPA2375IDSGR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

LOW BROADBAND NOISE, 10-MHZ, 500

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,646 pcs in stock ships same day before 6pm

from $1.9200

Quantity Unit Price
1+ $1.9200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA2375IDSGR?

OPA2375IDSGR is a low broadband noise, 10-mhz, 500, featuring the 8-WFDFN Exposed Pad package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

4 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA2375IDR IC OPAMP GP 2 CIRCUIT 8SOIC 2,969 $1.7100 In Stock
OPA2375IPWR IC OPAMP GP 2 CIRCUIT 8TSSOP 2,923 $1.7300 In Stock
OPA2375IDDFR LOW BROADBAND NOISE, 10-MHZ, 500 2,940 $1.7300 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OPA2375IDSGR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type CMOS
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 4.6V/µs
Gain Bandwidth Product 10 MHz
-3db Bandwidth -
Current - Input Bias 3 pA
Voltage - Input Offset 150 µV
Current - Supply 990µA
Current - Output / Channel 68 mA
Voltage - Supply, Single/Dual (±) 1.7V ~ 5.5V, ±0.85V ~ 2.75V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case 8-WFDFN Exposed Pad
Supplier Device Package 8-WSON (2x2)

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLV6742IDSGR DUAL, 10-MHZ, LOW NOISE, LOW-POW 3,659 $1.3800 100%
MCP6071T-E/MNY IC OPAMP GP 1 CIRCUIT 8TDFN 7,075 $0.7100 93%
MCP6052T-E/MNY IC OPAMP GP 2 CIRCUIT 8TDFN 4,894 $1.0300 93%
MCP6061T-E/MNY IC OPAMP GP 1 CIRCUIT 8TDFN 9,031 $0.5562 93%
MCP6072T-E/MNY IC OPAMP GP 2 CIRCUIT 8TDFN 5,197 $0.9700 93%
MCP6062T-E/MNY IC OPAMP GP 2 CIRCUIT 8TDFN 5,048 $1.0000 93%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA2375IDSGR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.