OPA2322SAIDGST Texas Instruments component image

OPA2322SAIDGST

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 2 CIRCUIT 10VSSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,791 pcs in stock ships same day before 6pm

from $1.8685

Quantity Unit Price
1 - 249 $2.8500
250+ $1.8685 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA2322SAIDGST?

OPA2322SAIDGST is a ic opamp gp 2 circuit 10vssop, featuring the 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA2322AIDR IC OPAMP GP 2 CIRCUIT 8SOIC 2,162 $2.3600 In Stock
OPA2322AIDRGT IC OPAMP GP 2 CIRCUIT 8SON 1,897 $2.7000 In Stock
OPA2322AIDGKR IC OPAMP GP 2 CIRCUIT 8VSSOP 2,163 $2.3600 In Stock
OPA2322SAIDGSR IC OPAMP GP 2 CIRCUIT 10VSSOP 1,799 $2.8300 In Stock
OPA2322AIDGKT IC OPAMP GP 2 CIRCUIT 8VSSOP 1,883 $2.7000 In Stock
OPA2322AIDRGR IC OPAMP GP 2 CIRCUIT 8SON 4,000 $1.2592 In Stock
OPA2322AID IC OPAMP GP 2 CIRCUIT 8SOIC 1,808 $2.8300 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OPA2322SAIDGST Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type CMOS
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 10V/µs
Gain Bandwidth Product 20 MHz
-3db Bandwidth -
Current - Input Bias 0.2 pA
Voltage - Input Offset 500 µV
Current - Supply 1.6mA (x2 Channels)
Current - Output / Channel 65 mA
Voltage - Supply, Single/Dual (±) 1.8V ~ 5.5V, ±0.9V ~ 2.75V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package 10-VSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OPA2316SIDGSR IC OPAMP GP 2 CIRCUIT 10VSSOP 2,765 $1.8300 100%
OPA2316SIDGS IC OPAMP GP 2 CIRCUIT 10VSSOP 2,347 $2.1700 100%
OPA2322SAIDGSR IC OPAMP GP 2 CIRCUIT 10VSSOP 1,799 $2.8300 100%
TLV2463CDGSRG4 IC OPAMP GP 2 CIRCUIT 10VSSOP 3,387 $1.4930 78%
TLV2463IDGS TLV2463 DUAL LOW-POWER, RAIL-TO- 3,125 $1.6200 78%
TLV2463IDGSG4 OPERATIONAL AMPLIFIER, 2 FUNC, 2 3,125 $1.6200 78%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA2322SAIDGST or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.