OPA145IDGKR Texas Instruments component image

OPA145IDGKR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP JFET 1 CIRCUIT 8VSSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

4,201 pcs in stock ships same day before 6pm

from $1.1574

Quantity Unit Price
1 - 2,499 $1.2002
2,500 - 4,999 $1.2002
5,000+ $1.1574 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the OPA145IDGKR?

OPA145IDGKR is a ic opamp jfet 1 circuit 8vssop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
OPA145IDBVT IC OPAMP JFET 1 CIRCUIT SOT23-5 1,818 $2.8100 In Stock
OPA145IDGKT IC OPAMP JFET 1 CIRCUIT 8VSSOP 1,819 $2.8100 In Stock
OPA145IDBVR IC OPAMP JFET 1 CIRCUIT SOT23-5 1,875 $2.7200 In Stock
OPA145IDR IC OPAMP JFET 1 CIRCUIT 8SOIC 1,887 $2.7200 In Stock
OPA145ID IC OPAMP JFET 1 CIRCUIT 8SOIC 1,730 $2.9400 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

OPA145IDGKR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type J-FET
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 20V/µs
Gain Bandwidth Product 5.5 MHz
-3db Bandwidth -
Current - Input Bias 2 pA
Voltage - Input Offset 40 µV
Current - Supply 445µA
Current - Output / Channel 20 mA
Voltage - Supply, Single/Dual (±) 4.5V ~ 36V, ±2.25V ~ 18V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-VSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
INA821IDGKT IC INST AMP 1 CIRCUIT 8VSSOP 841 $6.2800 100%
OPA145IDGKT IC OPAMP JFET 1 CIRCUIT 8VSSOP 1,819 $2.8100 100%
INA819IDGKT IC INST AMP 1 CIRCUIT 8VSSOP 899 $5.8300 100%
INA819IDGKR IC INST AMP 1 CIRCUIT 8VSSOP 1,698 $3.0127 100%
ADA4622-2ARMZ-RL IC OPAMP JFET 2 CIRCUIT 8MSOP 833 $6.3200 97%
LT1787HVCMS8#PBF IC CURR SENSE 1 CIRCUIT 8MSOP 720 $7.3200 97%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need OPA145IDGKR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.