NE5532N Sanyo Semiconductor/ON Semiconductor component image

NE5532N

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

IC OPAMP GP 2 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

4,242 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the NE5532N?

NE5532N is a ic opamp gp 2 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

14 variants of this series in stock
Part Number Description Stock Unit Price Status
NE5532AD8G IC OPAMP GP 2 CIRCUIT 8SOIC 3,409 $1.4800 In Stock
NE5532D8G IC OPAMP GP 2 CIRCUIT 8SOIC 3,227 $1.5700 In Stock
NE5532AD8R2 IC OPAMP GP 2 CIRCUIT 8SOIC 3,190 RFQ In Stock
SA5532N IC OPAMP GP 2 CIRCUIT 8DIP 4,046 RFQ In Stock
NE5532AD8R2G IC OPAMP GP 2 CIRCUIT 8SOIC 4,934 $1.0200 In Stock
NE5532D8R2G IC OPAMP GP 2 CIRCUIT 8SOIC 3,038 $1.6700 In Stock
NE5532NG IC OPAMP GP 2 CIRCUIT 8DIP 2,404 RFQ In Stock
NE5532DR2G IC OPAMP GP 2 CIRCUIT 16SOIC 3,980 $1.2700 In Stock
SE5532AD8R2G IC OPAMP GP 2 CIRCUIT 8SOIC 3,089 $1.6400 In Stock
NE5532AN IC OPAMP GP 2 CIRCUIT 8DIP 1,031 RFQ In Stock
+ 4 more variants in stock — browse the full category

Technical Parameters

NE5532N Specifications

Series -
Package Tube
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 2
Output Type -
Slew Rate 9V/µs
Gain Bandwidth Product 10 MHz
-3db Bandwidth -
Current - Input Bias 200 nA
Voltage - Input Offset 500 µV
Current - Supply 8mA
Current - Output / Channel 38 mA
Voltage - Supply, Single/Dual (±) ±3V ~ 20V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-DIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need NE5532N or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.