NE5532ADR Texas Instruments component image

NE5532ADR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC OPAMP GP 2 CIRCUIT 8SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

9,138 pcs in stock ships same day before 6pm

from $0.3712

Quantity Unit Price
1 - 2,499 $0.5500
2,500 - 4,999 $0.4060
5,000 - 12,499 $0.3857
12,500+ $0.3712 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the NE5532ADR?

NE5532ADR is a ic opamp gp 2 circuit 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

17 variants of this series in stock
Part Number Description Stock Unit Price Status
NE5532APSR IC OPAMP GP 2 CIRCUIT 8SO 4,898 $1.0300 In Stock
NE5532APSRE4 IC OPAMP GP 2 CIRCUIT 8SO 10,228 $0.4910 In Stock
NE5532DRG4 IC OPAMP GP 2 CIRCUIT 8SOIC 5,413 $0.9300 In Stock
NE5532ADRE4 IC OPAMP GP 2 CIRCUIT 8SOIC 9,130 $0.5500 In Stock
NE5532APG4 IC OPAMP GP 2 CIRCUIT 8DIP 1,012 RFQ In Stock
NE5532AP IC OPAMP GP 2 CIRCUIT 8DIP 4,006 $1.2600 In Stock
NE5532AD IC OPAMP GP 2 CIRCUIT 8SOIC 4,075 $1.2400 In Stock
NE5532PE4 IC OPAMP GP 2 CIRCUIT 8DIP 7,849 $0.6400 In Stock
NE5532DR IC OPAMP GP 2 CIRCUIT 8SOIC 10,033 $0.5000 In Stock
SA5532DR IC OPAMP GP 2 CIRCUIT 8SOIC 5,654 $0.8900 In Stock
+ 7 more variants in stock — browse the full category

Technical Parameters

NE5532ADR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type General Purpose
Number of Circuits 2
Output Type Differential
Slew Rate 9V/µs
Gain Bandwidth Product 10 MHz
-3db Bandwidth -
Current - Input Bias 200 nA
Voltage - Input Offset 500 µV
Current - Supply 8mA (x2 Channels)
Current - Output / Channel 38 mA
Voltage - Supply, Single/Dual (±) ±5V ~ 15V
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need NE5532ADR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.