NCV1077P065G Sanyo Semiconductor/ON Semiconductor component image

NCV1077P065G

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

HV SWITCHER FOR LOW POWER

Listed in PMIC - AC DC Converters, Offline Switchers

3,303 pcs in stock ships same day before 6pm

from $1.5285

Quantity Unit Price
1 - 249 $1.5285 BEST
250+ $1.5285 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the NCV1077P065G?

NCV1077P065G is a hv switcher for low power, featuring the 8-DIP (0.300", 7.62mm), 7 Leads package, Through Hole mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
NCV1072P100G IC REG SWITCHER HV 8PDIP 4,105 $1.2296 In Stock
NCV1075P100G HV SWITCHER FOR LOW POWER 4,100 $1.2296 In Stock
NCV1076P100G HV SWITCHER FOR LOW POWER 3,307 $1.5285 In Stock
NCV1075P065G HV SWITCHER FOR LOW POWER 4,098 $1.2296 In Stock
NCV1076P130G IC REG SWITCHER HV 8PDIP 3,320 $1.5285 In Stock
NCV1077CSTBT3G HIGH-VOLTAGE SWITCHER FOR 4,685 $1.0780 In Stock
NCV1076P065G HV SWITCHER FOR LOW POWER 3,311 $1.5279 In Stock
NCV1077STBT3G HIGH-VOLTAGE SWITCHER FOR 4,672 $1.0780 In Stock
NCV1072P065G IC REG SWITCHER HV 8PDIP 4,111 $1.2296 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

NCV1077P065G Specifications

Series Automotive, AEC-Q100
Package Tube
Part Status Active
Output Isolation Non-Isolated
Internal Switch(s) Yes
Voltage - Breakdown 670V
Topology Flyback
Voltage - Start Up 8.1 V
Voltage - Supply (Vcc/Vdd) 7.7V ~ 8.5V
Duty Cycle 69%
Frequency - Switching 65kHz
Power (Watts) 25 W
Fault Protection Current Limiting, Over Load, Over Voltage, Short Circuit
Control Features EN, Frequency Control, Soft Start
Operating Temperature -40°C ~ 125°C (TJ)
Package / Case 8-DIP (0.300", 7.62mm), 7 Leads
Supplier Device Package 7-DIP
Mounting Type Through Hole

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
NCV1076P100G HV SWITCHER FOR LOW POWER 3,307 $1.5285 100%
NCV1076P130G IC REG SWITCHER HV 8PDIP 3,320 $1.5285 100%
NCV1076P065G HV SWITCHER FOR LOW POWER 3,311 $1.5279 100%
NCV1072P100G IC REG SWITCHER HV 8PDIP 4,105 $1.2296 99%
NCV1075P100G HV SWITCHER FOR LOW POWER 4,100 $1.2296 99%
NCV1075P065G HV SWITCHER FOR LOW POWER 4,098 $1.2296 99%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need NCV1077P065G or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.