NCP13992ACDR2G Sanyo Semiconductor/ON Semiconductor component image

NCP13992ACDR2G

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

HIGH PERF CURRENT MODE RE

Listed in PMIC - AC DC Converters, Offline Switchers

3,112 pcs in stock ships same day before 6pm

from $0.7250

Quantity Unit Price
1 - 2,499 $1.6300
2,500 - 4,999 $0.7830
5,000 - 12,499 $0.7540
12,500+ $0.7250 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the NCP13992ACDR2G?

NCP13992ACDR2G is a high perf current mode re, featuring the 16-SOIC (0.154", 3.90mm Width), 14 Leads package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
NCP13992AFDR2G IC CTLR HALF BRIDGE RES 16SOIC 6,443 $0.7800 In Stock
NCP13992AHDR2G IC CTLR HALF BRIDGE RES 16SOIC 6,443 $0.7800 In Stock
NCP13992AADR2G HIGH PERF CURRENT MODE RE 2,841 $1.7900 In Stock
NCP13992ABDR2G HIGH PERF CURRENT MODE RE 3,105 $1.6300 In Stock
NCP13992AEDR2G IC CTLR HALF BRIDGE RES 16SOIC 6,458 $0.7800 In Stock
NCP13992AJDR2G HIGH PERF CURRENT MODE RESONANT 6,452 $0.7800 In Stock
NCP13992AGDR2G IC CTLR HALF BRIDGE RES 16SOIC 6,457 $0.7800 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

NCP13992ACDR2G Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Output Isolation Isolated
Internal Switch(s) No
Voltage - Breakdown -
Topology Half-Bridge
Voltage - Start Up 9 V
Voltage - Supply (Vcc/Vdd) 7.5V ~ 10V
Duty Cycle 50%
Frequency - Switching 20kHz ~ 750kHz
Power (Watts) -
Fault Protection Over Current, Over/Under Voltage, Short Circuit
Control Features EN, Frequency Control, Soft Start, Sync
Operating Temperature -50°C ~ 150°C (TJ)
Package / Case 16-SOIC (0.154", 3.90mm Width), 14 Leads
Supplier Device Package 16-SOIC
Mounting Type Surface Mount

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
NCP13992ABDR2G HIGH PERF CURRENT MODE RE 3,105 $1.6300 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need NCP13992ACDR2G or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.