NCP1071P130G Sanyo Semiconductor/ON Semiconductor component image

NCP1071P130G

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

IC REG SW 700V SMPS 8DIP

Listed in PMIC - AC DC Converters, Offline Switchers

7,124 pcs in stock ships same day before 6pm

from $0.7059

Quantity Unit Price
1 - 449 $0.7059 BEST
450+ $0.7059 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the NCP1071P130G?

NCP1071P130G is a ic reg sw 700v smps 8dip, featuring the 8-DIP (0.300", 7.62mm), 7 Leads package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

29 variants of this series in stock
Part Number Description Stock Unit Price Status
NCP1077STCT3G IC REG SW 700V SMPS SOT223-4 6,360 $0.7899 In Stock
NCP1070STBT3G IC REG SW 700V SMPS SOT223-4 9,956 $0.5046 In Stock
NCP1071STCT3G IC REG SW 700V SMPS SOT223-4 9,658 $0.5201 In Stock
NCP1075STBT3G IC REG SW OFFLINE SMPS SOT-223-4 3,725 $1.3600 In Stock
NCP1072P100BG IC REG HV SWITCHER OFFLINE 8DIP 3,914 $1.2900 In Stock
NCP1077P065G IC REG SWITCHING HV SMPS 7DIP 5,172 $0.9741 In Stock
NCP1075P100G IC REG SWITCHING HV SMPS 7DIP 3,717 $1.3600 In Stock
NCP1072P100G IC REG SWITCHING HV SMPS 7DIP 3,725 $1.3600 In Stock
NCP1077STAT3G IC REG SWITCHING HV SMPS SOT223 3,064 $1.6500 In Stock
NCP1071STBT3G IC REG SW 700V SMPS SOT223-4 9,649 $0.5201 In Stock
+ 19 more variants in stock — browse the full category

Technical Parameters

NCP1071P130G Specifications

Series -
Package Tube
Part Status Active
Output Isolation Isolated
Internal Switch(s) Yes
Voltage - Breakdown 700V
Topology Flyback
Voltage - Start Up 8.2 V
Voltage - Supply (Vcc/Vdd) 6.3V ~ 10V
Duty Cycle 68%
Frequency - Switching 130kHz
Power (Watts) 14 W
Fault Protection Over Load, Over Temperature, Over Voltage, Short Circuit
Control Features -
Operating Temperature -40°C ~ 125°C (TJ)
Package / Case 8-DIP (0.300", 7.62mm), 7 Leads
Supplier Device Package 7-DIP
Mounting Type Through Hole

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
NCP1076P100G SWITCHING CONTROLLER, CURRENT-MO 6,797 $0.7400 100%
NCP1071P100G IC REG SW 700V SMPS 8DIP 7,118 $0.7059 100%
NCP1077P100G IC REG SW 700V SMPS 8DIP 3,919 $1.2900 100%
NCP1070P100G IC REG SW 700V SMPS 8DIP 7,348 $0.6848 100%
NCP1070P130G SWITCHING CONTROLLER, CURRENT-MO 10,459 $0.4800 100%
NCP1076P130G SWITCHING CONTROLLER, CURRENT-MO 6,797 $0.7400 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need NCP1071P130G or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.