MPT35A1R5F TE Connectivity AMP Connectors component image

MPT35A1R5F

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES 1.5 OHM 1% 35W TO220-2

Listed in Through Hole Resistors

685 pcs in stock ships same day before 6pm

from $7.8500

Quantity Unit Price
1+ $7.8500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MPT35A1R5F?

MPT35A1R5F is a res 1.5 ohm 1% 35w to220-2, featuring a power rating of 35W, a tolerance of ±1%, a Thick Film composition, and the TO-220-2 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
MPT100C470RF RES 470 OHM 1% 100W TO220-2 317 $17.6700 In Stock
MPT35C1K0F RES 1K OHM 1% 35W TO220-2 609 $8.6600 In Stock
MPT100XR10J RES 100M OHM 5% 100W TO220-2 366 $15.7200 In Stock
MPT35A10RF RES 10 OHM 1% 35W TO220-2 669 $7.8500 In Stock
MPT35XR47J RES 470M OHM 5% 35W TO220-2 577 $9.2400 In Stock
MPT100C330RJ RES 330 OHM 5% 100W TO220-2 363 $15.5500 In Stock
MPT100XR15J RES 150M OHM 5% 100W TO220-2 365 $15.7200 In Stock
MPT35XR15J RES 150M OHM 5% 35W TO220-2 576 $9.2400 In Stock
MPT35C6K8F RES 6.8K OHM 1% 35W TO220-2 612 $8.6600 In Stock
MPT35C2K2J RES 2.2K OHM 5% 35W TO220-2 721 $7.3900 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MPT35A1R5F Specifications

Series MPT, CGS
Package Tube
Part Status Active
Resistance 1.5 Ohms
Tolerance ±1%
Power (Watts) 35W
Composition Thick Film
Features Non-Inductive
Temperature Coefficient ±100ppm/°C
Operating Temperature -65°C ~ 150°C
Package / Case TO-220-2
Supplier Device Package TO-220
Size / Dimension 0.400" L x 0.181" W (10.16mm x 4.60mm)
Height - Seated (Max) 0.760" (19.30mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MPT35A1R8F RES 1.8 OHM 1% 35W TO220-2 686 $7.8500 89%
MPT35A1R2F RES 1.2 OHM 1% 35W TO220-2 685 $7.8500 87%
MPT35A2R2F RES 2.2 OHM 1% 35W TO220-2 681 $7.8500 77%
MPT35A1R0F RES 1 OHM 1% 35W TO220-2 670 $7.8500 76%
MPT35A1R5J RES 1.5 OHM 5% 35W TO220-2 755 $7.0000 75%
MPT35A2R7F RES 2.7 OHM 1% 35W TO220-2 673 $7.8500 65%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need MPT35A1R5F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.