MPCI-L200-02S u-blox component image

MPCI-L200-02S

In Stock

u-blox logo u-blox · franchised distributor

RX TXRX MODULE CELLULAR SMD

Listed in RF Transceiver Modules and Modems

3,795 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MPCI-L200-02S?

MPCI-L200-02S is a rx txrx module cellular smd, featuring a frequency of 850MHz, 900MHz, 1.9GHz, 2.1GHz, the 52-SMD Module case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

u-blox Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
MPCI-L210-03S RX TXRX MODULE CELL CAST SMD 59 $176.2400 In Stock
MPCI-L201-01S-00 RF TXRX 4G LTE CAT4 AT&T/VERIZON 3,215 RFQ In Stock
MPCI-L200-03S RX TXRX MODULE CELL CAST SMD 74 $176.2400 In Stock
MPCI-L280-03S RX TXRX MODULE CELL CAST SMD 74 $176.2400 In Stock
MPCI-L210-63S MOD MPCIE CELL LTE CAT4 4,174 RFQ In Stock
MPCI-L201-02S RX TXRX MODULE CEL AMERICA AT&T 64 $176.2400 In Stock
MPCI-L210-60S-01 RX TXRX MOD CELLULAR CARD ED EU 4,097 RFQ In Stock
MPCI-L220-02S RX TXRX MOD CELL CARD EDGE JAPAN 66 $176.2400 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

MPCI-L200-02S Specifications

Series MPCI-L2
Package Tray
Part Status Obsolete
RF Family/Standard Cellular
Protocol GSM, LTE, UMTS
Modulation GMSK
Frequency 850MHz, 900MHz, 1.9GHz, 2.1GHz
Data Rate 150Mbps
Power - Output 12dBm
Sensitivity -
Serial Interfaces UART, USB
Antenna Type -
Utilized IC / Part -
Memory Size -
Voltage - Supply 3.3V
Current - Receiving 245mA ~ 650mA
Current - Transmitting 245mA ~ 650mA
Mounting Type Surface Mount
Operating Temperature -40°C ~ 85°C
Package / Case 52-SMD Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

u-blox Parts in Stock

Request a Quote

Need MPCI-L200-02S or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.