MP930-0.040-5% Caddock Electronics, Inc. component image

MP930-0.040-5%

In Stock

Caddock Electronics, Inc. logo Caddock Electronics, Inc. · franchised distributor

RES 0.04 OHM 30W 5% TO220

Listed in Through Hole Resistors

728 pcs in stock ships same day before 6pm

from $3.7489

Quantity Unit Price
1 - 9 $7.2000
10 - 24 $6.7486
25 - 49 $6.2984
50 - 99 $5.5485
100 - 249 $4.7986
250 - 499 $4.3488
500 - 999 $4.0488
1,000+ $3.7489 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MP930-0.040-5%?

MP930-0-040-5 is a res 0.04 ohm 30w 5% to220, featuring a power rating of 30W, a tolerance of ±5%, a Thick Film composition, and the TO-220-2 Full Pack case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Caddock Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
MP916-0.010-5% RES 0.01 OHM 16W 5% TO220 599 $8.8300 In Stock
MP930-250-1% RES 250 OHM 30W 1% TO220 1,090 $4.7800 In Stock
MP930-0.033-5% RES 0.033 OHM 30W 5% TO220 735 $7.2000 In Stock
MP915-1.00K-1% RES 1K OHM 15W 1% TO126 1,120 $4.6400 In Stock
MP930-0.25-1% RES 0.25 OHM 30W 1% TO220 901 $5.7500 In Stock
MP930-25.0-1% RES 25 OHM 30W 1% TO220 948 $5.5000 In Stock
MP930-0.075-1% RES 0.075 OHM 30W 1% TO220 732 $7.2000 In Stock
MP9100-8.00-1% RES 8 OHM 100W 1% TO247 429 $13.0200 In Stock
MP930-300-1% RES 300 OHM 30W 1% TO220 945 $5.5000 In Stock
MP9100-0.40-1% RES 0.4 OHM 100W 1% TO247 398 $14.2600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MP930-0.040-5% Specifications

Series Kool-Pak®MP900
Package Tube
Part Status Active
Resistance 40 mOhms
Tolerance ±5%
Power (Watts) 30W
Composition Thick Film
Features Moisture Resistant, Non-Inductive
Temperature Coefficient 0/ +300ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-220-2 Full Pack
Supplier Device Package TO-220
Size / Dimension 0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max) 0.650" (16.52mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MP930-0.033-5% RES 0.033 OHM 30W 5% TO220 735 $7.2000 88%
MP930-0.030-5% RES 0.03 OHM 30W 5% TO220 729 $7.2000 83%
MP930-0.025-5% RES 0.025 OHM 30W 5% TO220 731 $7.2000 72%
MP930-0.020-5% RES 0.02 OHM 30W 5% TO220 649 $8.2800 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Caddock Electronics, Inc. Parts in Stock

Request a Quote

Need MP930-0.040-5% or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.