MP915-100-1% Caddock Electronics, Inc. component image

MP915-100-1%

In Stock

Caddock Electronics, Inc. logo Caddock Electronics, Inc. · franchised distributor

RES 100 OHM 15W 1% TO126

Listed in Through Hole Resistors

1,126 pcs in stock ships same day before 6pm

from $2.1443

Quantity Unit Price
1 - 49 $4.6400
50 - 99 $3.5595
100 - 999 $3.0627
1,000+ $2.1443 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MP915-100-1%?

MP915-100-1 is a res 100 ohm 15w 1% to126, featuring a power rating of 15W, a tolerance of ±1%, a Thick Film composition, and the TO-126-2 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Caddock Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
MP916-0.010-5% RES 0.01 OHM 16W 5% TO220 599 $8.8300 In Stock
MP930-250-1% RES 250 OHM 30W 1% TO220 1,090 $4.7800 In Stock
MP930-0.033-5% RES 0.033 OHM 30W 5% TO220 735 $7.2000 In Stock
MP915-1.00K-1% RES 1K OHM 15W 1% TO126 1,120 $4.6400 In Stock
MP930-0.25-1% RES 0.25 OHM 30W 1% TO220 901 $5.7500 In Stock
MP930-25.0-1% RES 25 OHM 30W 1% TO220 948 $5.5000 In Stock
MP930-0.075-1% RES 0.075 OHM 30W 1% TO220 732 $7.2000 In Stock
MP9100-8.00-1% RES 8 OHM 100W 1% TO247 429 $13.0200 In Stock
MP930-300-1% RES 300 OHM 30W 1% TO220 945 $5.5000 In Stock
MP9100-0.40-1% RES 0.4 OHM 100W 1% TO247 398 $14.2600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MP915-100-1% Specifications

Series Kool-Pak®MP900
Package Tube
Part Status Active
Resistance 100 Ohms
Tolerance ±1%
Power (Watts) 15W
Composition Thick Film
Features Moisture Resistant, Non-Inductive
Temperature Coefficient -20/ +80ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-126-2
Supplier Device Package TO-126
Size / Dimension 0.320" L x 0.110" W (8.12mm x 2.79mm)
Height - Seated (Max) 0.450" (11.44mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MP915-120-1% RES 120 OHM 15W 1% TO126 1,270 $4.0300 89%
MP915-75.0-1% RES 75 OHM 15W 1% TO126 1,120 $4.6400 83%
MP915-150-1% RES 150 OHM 15W 1% TO126 1,276 $4.0300 76%
MP915-56.0-1% RES 56 OHM 15W 1% TO126 1,281 $4.0300 65%
MP915-50.0-1% RES 50 OHM 15W 1% TO126 1,123 $4.6400 58%
MP915-200-1% RES 200 OHM 15W 1% TO126 1,110 $4.6400 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Caddock Electronics, Inc. Parts in Stock

Request a Quote

Need MP915-100-1% or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.