MP9100-2.50-1% Caddock Electronics, Inc. component image

MP9100-2.50-1%

In Stock

Caddock Electronics, Inc. logo Caddock Electronics, Inc. · franchised distributor

RES 2.5 OHM 100W 1% TO247

Listed in Through Hole Resistors

377 pcs in stock ships same day before 6pm

from $8.8220

Quantity Unit Price
1 - 24 $14.9800
25 - 99 $12.2599
100 - 999 $9.7059
1,000+ $8.8220 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MP9100-2.50-1%?

MP9100-2-50-1 is a res 2.5 ohm 100w 1% to247, featuring a power rating of 100W, a tolerance of ±1%, a Thick Film composition, and the TO-247-2 case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Caddock Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
MP916-0.010-5% RES 0.01 OHM 16W 5% TO220 599 $8.8300 In Stock
MP930-250-1% RES 250 OHM 30W 1% TO220 1,090 $4.7800 In Stock
MP930-0.033-5% RES 0.033 OHM 30W 5% TO220 735 $7.2000 In Stock
MP915-1.00K-1% RES 1K OHM 15W 1% TO126 1,120 $4.6400 In Stock
MP930-0.25-1% RES 0.25 OHM 30W 1% TO220 901 $5.7500 In Stock
MP930-25.0-1% RES 25 OHM 30W 1% TO220 948 $5.5000 In Stock
MP930-0.075-1% RES 0.075 OHM 30W 1% TO220 732 $7.2000 In Stock
MP9100-8.00-1% RES 8 OHM 100W 1% TO247 429 $13.0200 In Stock
MP930-300-1% RES 300 OHM 30W 1% TO220 945 $5.5000 In Stock
MP9100-0.40-1% RES 0.4 OHM 100W 1% TO247 398 $14.2600 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MP9100-2.50-1% Specifications

Series Kool-Pak®MP9000
Package Tube
Part Status Active
Resistance 2.5 Ohms
Tolerance ±1%
Power (Watts) 100W
Composition Thick Film
Features Moisture Resistant, Non-Inductive
Temperature Coefficient -20/ +80ppm/°C
Operating Temperature -55°C ~ 175°C
Package / Case TO-247-2
Supplier Device Package TO-247
Size / Dimension 0.620" L x 0.195" W (15.75mm x 4.95mm)
Height - Seated (Max) 0.825" (20.96mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MP9100-3.00-1% RES 3 OHM 100W 1% TO247 365 $14.9800 89%
MP9100-2.00-1% RES 2 OHM 100W 1% TO247 371 $14.9800 87%
MP9100-3.30-1% RES 3.3 OHM 100W 1% TO247 420 $13.0200 83%
MP9100-4.00-1% RES 4 OHM 100W 1% TO247 434 $13.0200 72%
MP9100-1.50-1% RES 1.5 OHM 100W 1% TO247 365 $14.9800 69%
MP9100-5.00-1% RES 5 OHM 100W 1% TO247 383 $14.9800 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Caddock Electronics, Inc. Parts in Stock

Request a Quote

Need MP9100-2.50-1% or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.