MP850-2.00-1% Caddock Electronics, Inc. component image

MP850-2.00-1%

In Stock

Caddock Electronics, Inc. logo Caddock Electronics, Inc. · franchised distributor

RES 2 OHM 50W 1% TO220

Listed in Through Hole Resistors

427 pcs in stock ships same day before 6pm

from $7.0924

Quantity Unit Price
1 - 49 $13.1400
50 - 99 $10.1301
100 - 999 $8.7612
1,000+ $7.0924 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MP850-2.00-1%?

MP850-2-00-1 is a res 2 ohm 50w 1% to220, featuring a power rating of 50W, a tolerance of ±1%, a Thick Film composition, and the TO-220-2 Full Pack case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Caddock Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
MP850-200-1% RES 200 OHM 50W 1% TO220 469 $11.6500 In Stock
MP825-0.050-1% RES 0.05 OHM 1% 25W TO126-2 460 $11.6600 In Stock
MP825-75.0-1% RES 75 OHM 1% 25W TO126-2 719 $7.2500 In Stock
MP825-5.00-1% RES 5 OHM 1% 25W TO126-2 577 $9.4600 In Stock
MP825-50.0-1% RES 50 OHM 1% 25W TO126-2 729 $7.2500 In Stock
MP825-2.00K-1% RES 2K OHM 1% 25W TO126-2 720 $7.2500 In Stock
MP850-75.0-1% RES 75 OHM 50W 1% TO220 472 $11.6500 In Stock
MP821-0.020-1% RES 0.02 OHM 20W 1% TO220 435 $12.6500 In Stock
MP821-5.00-1% RES 5 OHM 20W 1% TO220 493 $11.1000 In Stock
MP821-0.50-1% RES 0.5 OHM 20W 1% TO220 413 $13.0500 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MP850-2.00-1% Specifications

Series Kool-Pak®MP800
Package Tube
Part Status Active
Resistance 2 Ohms
Tolerance ±1%
Power (Watts) 50W
Composition Thick Film
Features Moisture Resistant, Non-Inductive
Temperature Coefficient -20/ +80ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-220-2 Full Pack
Supplier Device Package TO-220
Size / Dimension 0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max) 0.650" (16.52mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MP2060-2.00-1% RES 2 OHM 60W 1% TO220 516 $10.4300 91%
MP930-2.00-1% RES 2 OHM 30W 1% TO220 842 $6.1900 75%
MP930-2.50-1% RES 2.5 OHM 30W 1% TO220 840 $6.1900 62%
MP850-1.00-1% RES 1 OHM 50W 1% TO220 418 $13.1400 58%
MP930-1.50-1% RES 1.5 OHM 30W 1% TO220 975 $5.3800 58%
MP930-3.00-1% RES 3 OHM 30W 1% TO220 966 $5.3800 51%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Caddock Electronics, Inc. Parts in Stock

Request a Quote

Need MP850-2.00-1% or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.