MP820-200-1% Caddock Electronics, Inc. component image

MP820-200-1%

In Stock

Caddock Electronics, Inc. logo Caddock Electronics, Inc. · franchised distributor

RES 200 OHM 20W 1% TO220

Listed in Through Hole Resistors

624 pcs in stock ships same day before 6pm

from $4.5902

Quantity Unit Price
1 - 49 $8.5000
50 - 99 $6.5562
100 - 999 $5.6703
1,000+ $4.5902 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MP820-200-1%?

MP820-200-1 is a res 200 ohm 20w 1% to220, featuring a power rating of 20W, a tolerance of ±1%, a Thick Film composition, and the TO-220-2 Full Pack case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Caddock Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
MP850-200-1% RES 200 OHM 50W 1% TO220 469 $11.6500 In Stock
MP825-0.050-1% RES 0.05 OHM 1% 25W TO126-2 460 $11.6600 In Stock
MP825-75.0-1% RES 75 OHM 1% 25W TO126-2 719 $7.2500 In Stock
MP825-5.00-1% RES 5 OHM 1% 25W TO126-2 577 $9.4600 In Stock
MP825-50.0-1% RES 50 OHM 1% 25W TO126-2 729 $7.2500 In Stock
MP825-2.00K-1% RES 2K OHM 1% 25W TO126-2 720 $7.2500 In Stock
MP850-75.0-1% RES 75 OHM 50W 1% TO220 472 $11.6500 In Stock
MP821-0.020-1% RES 0.02 OHM 20W 1% TO220 435 $12.6500 In Stock
MP821-5.00-1% RES 5 OHM 20W 1% TO220 493 $11.1000 In Stock
MP821-0.50-1% RES 0.5 OHM 20W 1% TO220 413 $13.0500 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MP820-200-1% Specifications

Series Kool-Pak®MP800
Package Tube
Part Status Active
Resistance 200 Ohms
Tolerance ±1%
Power (Watts) 20W
Composition Thick Film
Features Moisture Resistant, Non-Inductive
Temperature Coefficient -20/ +50ppm/°C
Operating Temperature -55°C ~ 175°C
Package / Case TO-220-2 Full Pack
Supplier Device Package TO-220
Size / Dimension 0.400" L x 0.175" W (10.16mm x 4.45mm)
Height - Seated (Max) 0.590" (14.99mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MP820-100-1% RES 100 OHM 20W 1% TO220 636 $8.5000 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Caddock Electronics, Inc. Parts in Stock

Request a Quote

Need MP820-200-1% or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.