MLF14FTC10M0 Stackpole Electronics, Inc. component image

MLF14FTC10M0

In Stock

Stackpole Electronics, Inc. logo Stackpole Electronics, Inc. · franchised distributor

RES 10M OHM 1% 1/4W MELF 0204

Listed in Chip Resistor - Surface Mount

90,724 pcs in stock ships same day before 6pm

from $0.0551

Quantity Unit Price
1 - 2,999 $0.0551 BEST
3,000+ $0.0551 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MLF14FTC10M0?

MLF14FTC10M0 is a res 10m ohm 1% 1/4w melf 0204, featuring a power rating of 0.25W, 1/4W, a tolerance of ±1%, a Thin Film composition, and the MELF, 0204 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Stackpole Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
MLF14FTC1K30 RES 1.3K OHM 1% 1/4W MELF 0204 178,298 $0.0281 In Stock
MLF14FTC348R RES 348 OHM 1% 1/4W MELF 0204 178,287 $0.0281 In Stock
MLF14FTC442K RES 442K OHM 1% 1/4W MELF 0204 178,300 $0.0281 In Stock
MLF14FTC95R3 RES 95.3 OHM 1% 1/4W MELF 0204 178,286 $0.0281 In Stock
MLF14BTE270K RES 270K OHM 0.1% 1/4W MELF 0204 12,562 $0.3990 In Stock
MLF14BTE12R1 RES 12.1 OHM 0.1% 1/4W MELF 0204 18,841 $0.2660 In Stock
MLF14JTC47K0 RES 47K OHM 5% 1/4W MELF 0204 90,738 $0.0551 In Stock
MLF12DTE33K2 RES 33.2KOHM 0.5% 1/2W MELF 0207 66,697 $0.0750 In Stock
MLF14FTC59R0 RES 59 OHM 1% 1/4W MELF 0204 178,286 $0.0281 In Stock
MLF14FTC4K99 RES 4.99K OHM 1% 1/4W MELF 0204 178,297 $0.0281 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

MLF14FTC10M0 Specifications

Series MLF
Package Tape & Reel (TR)
Part Status Active
Resistance 10 MOhms
Tolerance ±1%
Power (Watts) 0.25W, 1/4W
Composition Thin Film
Features -
Temperature Coefficient ±50ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case MELF, 0204
Supplier Device Package 0204
Ratings -
Size / Dimension 0.055" Dia x 0.138" L (1.40mm x 3.50mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Same Manufacturer

Stackpole Electronics, Inc. Parts in Stock

Request a Quote

Need MLF14FTC10M0 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.