MIC5210-2.9BMM Rochester Electronics component image

MIC5210-2.9BMM

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LIN 2.9V/2.9V 150MA 8MSOP

Listed in PMIC - Voltage Regulators - Linear

11,949 pcs in stock ships same day before 6pm

from $0.4200

Quantity Unit Price
1 - 899 $0.4200 BEST
900+ $0.4200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MIC5210-2.9BMM?

MIC5210-2-9BMM is a ic reg lin 2.9v/2.9v 150ma 8msop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
MIC5210-2.7BMM IC REG LIN 2.7V/2.7V 150MA 8MSOP 11,935 $0.4200 In Stock
MIC5210-3.3BMM IC REG LIN 3.3V/3.3V 150MA 8MSOP 11,945 $0.4200 In Stock
MIC5210-3.0BMM IC REG LINEAR 3V/3V 150MA 8MSOP 11,949 $0.4200 In Stock
MIC5210-5.0BMM IC REG LINEAR 5V/5V 150MA 8MSOP 11,934 $0.4200 In Stock
MIC5210-2.8BMM IC REG LIN 2.8V/2.8V 150MA 8MSOP 11,948 $0.4200 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

MIC5210-2.9BMM Specifications

Series -
Package Bulk
Part Status Obsolete
Output Configuration Positive
Output Type Fixed
Number of Regulators 2
Voltage - Input (Max) 16V
Voltage - Output (Min/Fixed) 2.9V, 2.9V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.35V @ 150mA, 0.35V @ 150mA
Current - Output 150mA, 150mA
Current - Quiescent (Iq) 150 µA
Current - Supply (Max) 2.5 mA
PSRR 75dB (100Hz)
Control Features Enable
Protection Features Over Current, Over Temperature, Reverse Polarity
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-MSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need MIC5210-2.9BMM or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.