MIC5209BU Rochester Electronics component image

MIC5209BU

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LIN POS ADJ 500MA TO263-5

Listed in PMIC - Voltage Regulators - Linear

7,182 pcs in stock ships same day before 6pm

from $0.7000

Quantity Unit Price
1 - 649 $0.7000 BEST
650+ $0.7000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MIC5209BU?

MIC5209BU is a ic reg lin pos adj 500ma to263-5, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Rochester Electronics Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
MIC5209-3.3BU TR IC REG LINEAR 500MA LOW NOISE 8,371 $0.6000 In Stock
MIC5209-4.2BS TR IC REG LINEAR 500MA LOW NOISE 11,397 $0.4400 In Stock
MIC5209-3.3BU IC REG LINEAR 3.3V 500MA TO263-5 8,363 $0.6000 In Stock
MIC5209-2.5BU IC REG LINEAR 2.5V 500MA TO263-5 8,382 $0.6000 In Stock
MIC5209-3.0BU IC REG LINEAR 3V 500MA TO263-5 8,383 $0.6000 In Stock
MIC5209-3.6BMTR 500 MILLAMPLOW-NOISE LDO REG 10,677 $0.4700 In Stock
MIC5209-3.6BSTR 500 MILLAMPLOW-NOISE LDO REG 11,398 $0.4400 In Stock
MIC5209-2.5BSTR 500 MILLAMPLOW-NOISE LDO REG 11,408 $0.4400 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

MIC5209BU Specifications

Series -
Package Tube
Part Status Obsolete
Output Configuration Positive
Output Type Adjustable
Number of Regulators 1
Voltage - Input (Max) 16V
Voltage - Output (Min/Fixed) 2.5V
Voltage - Output (Max) 5V
Voltage Dropout (Max) 0.6V @ 500mA
Current - Output 500mA
Current - Quiescent (Iq) 170 µA
Current - Supply (Max) 25 mA
PSRR 75dB (120Hz)
Control Features Enable
Protection Features Over Current, Over Temperature, Reverse Polarity
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need MIC5209BU or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.