MF1PLUS6001DA4/03, NXP Semiconductors component image

MF1PLUS6001DA4/03,

In Stock

NXP Semiconductors logo NXP Semiconductors · franchised distributor

IC RFID TRANSP 13.56MHZ PLLMC

Listed in RFID, RF Access, Monitoring ICs

3,556 pcs in stock ships same day before 6pm

from $0.6985

Quantity Unit Price
1 - 32,999 $1.4256
33,000+ $0.6985 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MF1PLUS6001DA4/03,?

MF1PLUS6001DA4-03 is a ic rfid transp 13.56mhz pllmc, featuring a frequency of 13.56MHz, the MOA4, Smart Card Module case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

NXP Semiconductors Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
MF1PLUS6031DA4/03, IC RFID TRANSP 13.56MHZ PLLMC 3,557 $1.4256 In Stock
MF1SPLUS8031DA4/03 IC RFID TRANSP 13.56MHZ PLLMC 3,098 $1.6387 In Stock
MF1PLUS8001DA4/03, IC RFID TRANSP 13.56MHZ PLLMC 2,816 $1.7963 In Stock
MF1SPLUS6031DA4/03 IC RFID TRANSP 13.56MHZ PLLMC 3,988 $1.2686 In Stock
MF1PLUS8031DA4/03, IC RFID TRANSP 13.56MHZ PLLMC 2,826 $1.7963 In Stock
MF1PLUS6001DUD/03, IC RFID TRANSP 13.56MHZ PLLMC 3,960 $1.2777 In Stock
MF1PLUS8001DUD/03, IC RFID TRANSP 13.56MHZ PLLMC 3,084 $1.6478 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

MF1PLUS6001DA4/03, Specifications

Series MIFARE PLUS™
Package Tape & Reel (TR)
Part Status Active
Type RFID Transponder
Frequency 13.56MHz
Standards ISO 14443, MIFARE
Interface UART
Voltage - Supply -
Operating Temperature -25°C ~ 70°C
Mounting Type Surface Mount
Package / Case MOA4, Smart Card Module
Supplier Device Package PLLMC

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

NXP Semiconductors Parts in Stock

Request a Quote

Need MF1PLUS6001DA4/03, or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.