MCP6232-E/P Roving Networks / Microchip Technology component image

MCP6232-E/P

In Stock

Roving Networks / Microchip Technology logo Roving Networks / Microchip Technology · franchised distributor

IC OPAMP GP 2 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

15,198 pcs in stock ships same day before 6pm

from $0.3090

Quantity Unit Price
1 - 1,199 $0.3300
1,200+ $0.3090 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MCP6232-E/P?

MCP6232-E-P is a ic opamp gp 2 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Roving Networks / Microchip Technology Series Variants in Stock

30 variants of this series in stock
Part Number Description Stock Unit Price Status
MCP6234T-E/ST IC OPAMP GP 4 CIRCUIT 14TSSOP 7,732 $0.6500 In Stock
MCP6232T-E/MSVAO IC OPAMP GP 2 CIRCUIT 8MSOP 3,938 RFQ In Stock
MCP6231-E/MS IC OPAMP GP 1 CIRCUIT 8MSOP 14,747 $0.3400 In Stock
MCP6231T-E/OT IC OPAMP GP 1 CIRCUIT SOT23-5 15,673 $0.3200 In Stock
MCP6234-E/ST IC OPAMP GP 4 CIRCUIT 14TSSOP 7,730 $0.6500 In Stock
MCP6232T-E/SN IC OPAMP GP 2 CIRCUIT 8SOIC 12,225 $0.4100 In Stock
MCP6232-E/SN IC OPAMP GP 2 CIRCUIT 8SOIC 12,241 $0.4100 In Stock
MCP6231T-E/OTVAO IC OPAMP GP 1 CIRCUIT SOT23-5 16,697 $0.3000 In Stock
MCP6234-E/P IC OPAMP GP 4 CIRCUIT 14DIP 7,396 $0.6800 In Stock
MCP6232T-E/MS IC OPAMP GP 2 CIRCUIT 8MSOP 12,235 $0.4100 In Stock
+ 20 more variants in stock — browse the full category

Technical Parameters

MCP6232-E/P Specifications

Series -
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 0.15V/µs
Gain Bandwidth Product 300 kHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 5 mV
Current - Supply 20µA (x2 Channels)
Current - Output / Channel 23 mA
Voltage - Supply, Single/Dual (±) 1.8V ~ 6V
Operating Temperature -40°C ~ 125°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MCP6231-E/P IC OPAMP GP 1 CIRCUIT 8DIP 14,332 $0.3500 100%
NJM2732D IC OPAMP GP 2 CIRCUIT 8DIP 3,890 $1.2960 100%
MCP6002-I/P IC OPAMP GP 2 CIRCUIT 8DIP 13,927 $0.3600 100%
MCP6272-E/P IC OPAMP GP 2 CIRCUIT 8DIP 6,707 $0.7500 95%
MCP6271-E/P IC OPAMP GP 1 CIRCUIT 8DIP 9,122 $0.5500 95%
MCP6273-E/P IC OPAMP GP 1 CIRCUIT 8DIP 8,657 $0.5800 95%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Roving Networks / Microchip Technology Parts in Stock

Request a Quote

Need MCP6232-E/P or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.