MCP609-I/P Roving Networks / Microchip Technology component image

MCP609-I/P

In Stock

Roving Networks / Microchip Technology logo Roving Networks / Microchip Technology · franchised distributor

IC OPAMP GP 4 CIRCUIT 14DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

3,148 pcs in stock ships same day before 6pm

from $1.2161

Quantity Unit Price
1 - 24 $1.6100
25 - 99 $1.3378
100+ $1.2161 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MCP609-I/P?

MCP609-I-P is a ic opamp gp 4 circuit 14dip, featuring the 14-DIP (0.300", 7.62mm) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Roving Networks / Microchip Technology Series Variants in Stock

23 variants of this series in stock
Part Number Description Stock Unit Price Status
MCP607-I/ST IC OPAMP GP 2 CIRCUIT 8TSSOP 4,885 $1.0300 In Stock
MCP608T-I/SN IC OPAMP GP 1 CIRCUIT 8SOIC 8,100 $0.6200 In Stock
MCP608-I/P IC OPAMP GP 1 CIRCUIT 8DIP 5,847 $0.8600 In Stock
MCP608-I/SN IC OPAMP GP 1 CIRCUIT 8SOIC 6,147 $0.8200 In Stock
MCP609T-I/SLVAO IC OPAMP GP 4 CIRCUIT 14SOIC 4,170 RFQ In Stock
MCP607-I/SN IC OPAMP GP 2 CIRCUIT 8SOIC 4,891 $1.0300 In Stock
MCP606T-I/SN IC OPAMP GP 1 CIRCUIT 8SOIC 6,615 $0.7600 In Stock
MCP606-I/SN IC OPAMP GP 1 CIRCUIT 8SOIC 6,620 $0.7600 In Stock
MCP609-I/SL IC OPAMP GP 4 CIRCUIT 14SOIC 3,304 $1.5300 In Stock
MCP606-I/P IC OPAMP GP 1 CIRCUIT 8DIP 6,377 $0.7900 In Stock
+ 13 more variants in stock — browse the full category

Technical Parameters

MCP609-I/P Specifications

Series -
Package Tube
Part Status Active
Amplifier Type CMOS
Number of Circuits 4
Output Type Rail-to-Rail
Slew Rate 0.08V/µs
Gain Bandwidth Product 155 kHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 250 µV
Current - Supply 18.7µA (x4 Channels)
Current - Output / Channel 17 mA
Voltage - Supply, Single/Dual (±) 2.5V ~ 6V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Through Hole
Package / Case 14-DIP (0.300", 7.62mm)
Supplier Device Package 14-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TLV2623IN OPERATIONAL AMPLIFIER 9,467 $0.5300 100%
TLV2624IN OPERATIONAL AMPLIFIER 7,495 $0.6700 100%
TLV2473AIN TLV2473A DUAL LOW-POWER RAIL-TO- 2,146 $2.3800 97%
TLV2473IN TLV2473 DUAL LOW-POWER RAIL-TO-R 2,679 $1.8900 97%
TLV2474AIN IC OPAMP GP 4 CIRCUIT 14DIP 1,118 $4.6200 97%
TLV2474CN TLV2474 QUAD 6V, LOW-POWER RAIL- 2,857 $1.7700 97%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Roving Networks / Microchip Technology Parts in Stock

Request a Quote

Need MCP609-I/P or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.