MAX8530ETTK2+ Rochester Electronics component image

MAX8530ETTK2+

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LINEAR 2.8V/1.8V 6TDFN

Listed in PMIC - Voltage Regulators - Linear

5,604 pcs in stock ships same day before 6pm

from $0.9000

Quantity Unit Price
1+ $0.9000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX8530ETTK2+?

MAX8530ETTK2 is a ic reg linear 2.8v/1.8v 6tdfn, featuring the 6-WDFN Exposed Pad package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Rochester Electronics Series Variants in Stock

26 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX8531ETTGG IC REG LINEAR DUAL LDO 2,988 $1.7000 In Stock
MAX8530ETT8A IC REG LINEAR LDO 3,194 $1.5800 In Stock
MAX8530ETT8A-T IC REG LINEAR LDO 4,209 $1.2000 In Stock
MAX8530ETTP2+ IC REG LINEAR DUAL LDO 4,941 $1.0200 In Stock
MAX8530EBTKG-T IC REG LINEAR FIXED LDO REG 4,463 $1.1300 In Stock
MAX8531EBTA8-T IC REG LINEAR LDO 4,460 $1.1300 In Stock
MAX8530EBTJ2 IC REG LINEAR LDO 3,174 $1.5900 In Stock
MAX8531EBTJJ-T IC REG LINEAR LDO 4,473 $1.1300 In Stock
MAX8530EBT8A IC REG LINEAR LDO 4,713 $1.0700 In Stock
MAX8530ETTO2 IC REG LINEAR DUAL LDO 4,718 $1.0700 In Stock
+ 16 more variants in stock — browse the full category

Technical Parameters

MAX8530ETTK2+ Specifications

Series -
Package Bulk
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 2
Voltage - Input (Max) 6.5V
Voltage - Output (Min/Fixed) 2.8V, 1.8V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.2V @ 100mA, 0.2V @ 100mA
Current - Output 200mA, 150mA
Current - Quiescent (Iq) 220 µA
Current - Supply (Max) 150 µA
PSRR 60dB (100Hz)
Control Features Enable, Reset
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 6-WDFN Exposed Pad
Supplier Device Package 6-TDFN-EP (3x3)

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need MAX8530ETTK2+ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.