MAX494ESD+ Maxim Integrated component image

MAX494ESD+

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC OPAMP GP 4 CIRCUIT 14SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

649 pcs in stock ships same day before 6pm

from $7.0151

Quantity Unit Price
1 - 9 $8.2500
10 - 49 $7.5816
50 - 99 $7.2678
100+ $7.0151 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX494ESD+?

MAX494ESD is a ic opamp gp 4 circuit 14soic, featuring the 14-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

26 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX495CUA IC OPAMP GP 1 CIRCUIT 8UMAX 1,544 RFQ In Stock
MAX495CUA+T IC OPAMP GP 1 CIRCUIT 8UMAX 3,697 RFQ In Stock
MAX494CPD+ IC OPAMP GP 4 CIRCUIT 14DIP 650 $8.1700 In Stock
MAX494CPD IC OPAMP GP 4 CIRCUIT 14DIP 1,006 RFQ In Stock
MAX494CSD+ IC OPAMP GP 4 CIRCUIT 14SOIC 735 $7.2600 In Stock
MAX495CPA IC OPAMP GP 1 CIRCUIT 8DIP 3,307 RFQ In Stock
MAX494EPD+ IC OPAMP GP 4 CIRCUIT 14DIP 440 $12.2000 In Stock
MAX494EPD IC OPAMP GP 4 CIRCUIT 14DIP 1,333 RFQ In Stock
MAX492ESA-T IC OPAMP GP 2 CIRCUIT 8SOIC 3,762 RFQ In Stock
MAX495CSA+ IC OPAMP GP 1 CIRCUIT 8SOIC 3,306 RFQ In Stock
+ 16 more variants in stock — browse the full category

Technical Parameters

MAX494ESD+ Specifications

Series -
Package Tube
Part Status Active
Amplifier Type General Purpose
Number of Circuits 4
Output Type Rail-to-Rail
Slew Rate 0.2V/µs
Gain Bandwidth Product 500 kHz
-3db Bandwidth -
Current - Input Bias 25 nA
Voltage - Input Offset 200 µV
Current - Supply 150µA (x4 Channels)
Current - Output / Channel 30 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 6V, ±1.35V ~ 3V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154", 3.90mm Width)
Supplier Device Package 14-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX494CSD IC GP OPAMP 4 CIRCUIT 14SOIC 1,011 $5.1000 100%
MAX494ESD-T IC OPAMP GP 4 CIRCUIT 14SOIC 3,296 RFQ 100%
MAX494CSD-T IC OPAMP GP 4 CIRCUIT 14SOIC 1,667 RFQ 100%
TSV324IDT IC OPAMP GP 4 CIRCUIT 14SO 7,283 $0.6900 97%
TSV324IYDT IC OPAMP GP 4 CIRCUIT 14SO 6,613 $0.7600 97%
OPA4344UAG4 IC OPAMP GP 4 CIRCUIT 14SOIC 1,746 $2.9434 93%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX494ESD+ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.