MAX4426CPA+ Maxim Integrated component image

MAX4426CPA+

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC GATE DRVR LOW-SIDE 8DIP

Listed in PMIC - Gate Drivers

1,430 pcs in stock ships same day before 6pm

from $3.5742

Quantity Unit Price
1 - 149 $3.5742 BEST
150+ $3.5742 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX4426CPA+?

MAX4426CPA is a ic gate drvr low-side 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting, a supply range of 4.5V ~ 18V. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

18 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX4428EPA+ IC GATE DRVR LOW-SIDE 8DIP 1,028 $5.0600 In Stock
MAX4427CPA+ IC GATE DRVR LOW-SIDE 8DIP 1,080 $4.7800 In Stock
MAX4426CSA+ IC GATE DRVR LOW-SIDE 8SOIC 1,260 $4.0900 In Stock
MAX4427ESA+T IC GATE DRVR LOW-SIDE 8SOIC 1,862 $2.7430 In Stock
MAX4426ESA+T IC GATE DRVR LOW-SIDE 8SOIC 3,294 RFQ In Stock
MAX4426ESA+ IC GATE DRVR LOW-SIDE 8SOIC 1,186 $4.3500 In Stock
MAX4428CSA+T IC GATE DRVR LOW-SIDE 8SOIC 975 RFQ In Stock
MAX4428CPA+ IC GATE DRVR LOW-SIDE 8DIP 1,077 $4.7800 In Stock
MAX4427CSA+T IC GATE DRVR LOW-SIDE 8SOIC 2,043 $2.4960 In Stock
MAX4427ESA+ IC GATE DRVR LOW-SIDE 8SOIC 1,155 $4.4700 In Stock
+ 8 more variants in stock — browse the full category

Technical Parameters

MAX4426CPA+ Specifications

Series -
Package Tube
Part Status Active
Driven Configuration Low-Side
Channel Type Independent
Number of Drivers 2
Gate Type N-Channel, P-Channel MOSFET
Voltage - Supply 4.5V ~ 18V
Logic Voltage - VIL, VIH 0.8V, 2.4V
Current - Peak Output (Source, Sink) 1.5A, 1.5A
Input Type Inverting
High Side Voltage - Max (Bootstrap) -
Rise / Fall Time (Typ) 20ns, 20ns
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MCP1406-E/P IC GATE DRVR LOW-SIDE 8DIP 4,415 $1.1400 100%
ICL7667EPA+ IC GATE DRVR HALF-BRIDGE 8DIP 1,215 $4.2800 97%
ICL7667CPA+ IC GATE DRVR HALF-BRIDGE 8DIP 1,168 $4.4500 97%
TC1413CPA IC GATE DRVR LOW-SIDE 8DIP 3,915 $1.2900 95%
TC1413EPA IC GATE DRVR LOW-SIDE 8DIP 3,803 $1.3300 95%
ICL7667CPAZ ICL7667 DUAL POWER MOSFET DRIVER 2,487 $2.0500 92%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX4426CPA+ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.