MAX4168ESD+T Maxim Integrated component image

MAX4168ESD+T

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC OPAMP GP 2 CIRCUIT 14SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,265 pcs in stock ships same day before 6pm

from $1.9861

Quantity Unit Price
1 - 2,499 $2.2490
2,500+ $1.9861 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX4168ESD+T?

MAX4168ESD-T is a ic opamp gp 2 circuit 14soic, featuring the 14-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Maxim Integrated Series Variants in Stock

23 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX4165EUK+T IC OPAMP GP 1 CIRCUIT SOT23-5 1,583 $3.2400 In Stock
MAX4168EUB+T IC OPAMP GP 2 CIRCUIT 10UMAX 2,263 $2.2490 In Stock
MAX4167EPA+ IC OPAMP GP 2 CIRCUIT 8DIP 1,387 $3.6900 In Stock
MAX4168EUB IC OPAMP GP 2 CIRCUIT 10UMAX 2,992 RFQ In Stock
MAX4166ESA-T IC OPAMP GP 1 CIRCUIT 8SOIC 1,968 RFQ In Stock
MAX4168EUB+ IC OPAMP GP 2 CIRCUIT 10UMAX 1,570 $3.2600 In Stock
MAX4166EUA+T IC OPAMP GP 1 CIRCUIT 8UMAX 2,923 $1.7290 In Stock
MAX4169ESD+T IC OPAMP GP 4 CIRCUIT 14SOIC 2,296 RFQ In Stock
MAX4166ESA+ IC OPAMP GP 1 CIRCUIT 8SOIC 2,071 $2.4700 In Stock
MAX4166EUA+ IC OPAMP GP 1 CIRCUIT 8UMAX 2,074 $2.4700 In Stock
+ 13 more variants in stock — browse the full category

Technical Parameters

MAX4168ESD+T Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Amplifier Type General Purpose
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 2V/µs
Gain Bandwidth Product 5 MHz
-3db Bandwidth -
Current - Input Bias 50 nA
Voltage - Input Offset 250 µV
Current - Supply 1.3mA (x2 Channels)
Current - Output / Channel 125 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 6.5V, ±1.35V ~ 3.25V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154", 3.90mm Width)
Supplier Device Package 14-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX4127ESD IC GP OPAMP 2 CIRCUIT 14SOIC 2,263 $2.2400 100%
MAX4127ESD+T IC OPAMP GP 2 CIRCUIT 14SOIC 621 RFQ 100%
MAX4168ESD+ IC OPAMP GP 2 CIRCUIT 14SOIC 1,605 $3.2100 100%
TLV2473AIDR TLV2473A DUAL LOW-POWER RAIL-TO- 2,329 $2.1800 96%
LMC6464BIM-TI OPERATIONAL AMPLIFIER 1,420 $3.6100 56%
MAX4169ESD+T IC OPAMP GP 4 CIRCUIT 14SOIC 2,296 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX4168ESD+T or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.