MAX4040EUA-T Maxim Integrated component image

MAX4040EUA-T

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC OPAMP GP 1 CIRCUIT 8UMAX

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,211 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the MAX4040EUA-T?

MAX4040EUA-T is a ic opamp gp 1 circuit 8umax, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

31 variants of this series in stock
Part Number Description Stock Unit Price Status
MAX4043ESD-T IC OPAMP GP 2 CIRCUIT 14SOIC 4,545 RFQ In Stock
MAX4041EUA+T IC OPAMP GP 1 CIRCUIT 8UMAX 3,109 RFQ In Stock
MAX4043ESD+T IC OPAMP GP 2 CIRCUIT 14SOIC 600 RFQ In Stock
MAX4041ESA-T IC OPAMP GP 1 CIRCUIT 8SOIC 3,499 RFQ In Stock
MAX4043ESD+ IC OPAMP GP 2 CIRCUIT 14SOIC 3,784 RFQ In Stock
MAX4040EUK-T IC OPAMP GP 1 CIRCUIT SOT23-5 4,550 RFQ In Stock
MAX4040EUK+T IC OPAMP GP 1 CIRCUIT SOT23-5 2,361 $2.1500 In Stock
MAX4044ESD+ IC OPAMP GP 4 CIRCUIT 14SOIC 4,844 RFQ In Stock
MAX4042ESA+ IC OPAMP GP 2 CIRCUIT 8SOIC 2,506 $2.0200 In Stock
MAX4042EUA+ IC OPAMP GP 2 CIRCUIT 8UMAX 2,566 $1.9800 In Stock
+ 21 more variants in stock — browse the full category

Technical Parameters

MAX4040EUA-T Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 0.04V/µs
Gain Bandwidth Product 90 kHz
-3db Bandwidth -
Current - Input Bias 2 nA
Voltage - Input Offset 250 µV
Current - Supply 14µA
Current - Output / Channel 2.5 mA
Voltage - Supply, Single/Dual (±) 2.4V ~ 5.5V, ±1.2V ~ 2.75V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-uMAX

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MAX4042EUA IC GP OPAMP 2 CIRCUIT 8UMAX 4,471 $1.1300 100%
MAX4040EUA IC OPAMP GP 1 CIRCUIT 8UMAX 2,732 RFQ 100%
OPA2377QDGKRQ1 IC OPAMP GP 2 CIRCUIT 8VSSOP 4,854 $1.0404 96%
OPA2377AIDGKT IC OPAMP GP 2 CIRCUIT 8VSSOP 2,665 $1.9000 96%
OPA2377AIDGKR OPA2377 LOW-COST, LOW NOISE, 5MH 6,440 $0.7800 96%
MAX4242EUA+ IC OPAMP GP 2 CIRCUIT 8UMAX 1,537 $3.3400 87%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need MAX4040EUA-T or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.