LT3040IMSE#PBF XinYun Electronics component image

LT3040IMSE#PBF

In Stock

XinYun Electronics logo XinYun Electronics · franchised distributor

IC REG LINEAR 0V 200MA 12MSOP

Listed in PMIC - Voltage Regulators - Linear

782 pcs in stock ships same day before 6pm

from $6.7400

Quantity Unit Price
1+ $6.7400 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LT3040IMSE#PBF?

LT3040IMSE-PBF is a ic reg linear 0v 200ma 12msop, featuring the 12-TSSOP (0.118", 3.00mm Width) Exposed Pad package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

XinYun Electronics Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
LT3040IDD#TRPBF IC REG LINEAR 0V 200MA 10DFN 1,481 $3.4650 In Stock
LT3040IDD#PBF IC REG LINEAR 0V 200MA 10DFN 815 $6.4900 In Stock
LT3040EDD#TRPBF IC REG LINEAR 0V 200MA 10DFN 1,599 $3.2100 In Stock
LT3040EMSE#TRPBF IC REG LINEAR 0V 200MA 12MSOP 1,541 $3.3450 In Stock
LT3040IMSE#TRPBF IC REG LINEAR 0V 200MA 12MSOP 1,424 $3.6000 In Stock
LT3040EMSE#PBF IC REG LINEAR 0V 200MA 12MSOP 842 $6.2600 In Stock
LT3040EDD#PBF IC REG LINEAR 0V 200MA 10DFN 874 $6.0100 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LT3040IMSE#PBF Specifications

Series -
Package Tube
Part Status Active
Output Configuration Positive
Output Type Programmable
Number of Regulators 1
Voltage - Input (Max) 20V
Voltage - Output (Min/Fixed) 0V
Voltage - Output (Max) 15V
Voltage Dropout (Max) 0.6V @ 200mA
Current - Output 200mA
Current - Quiescent (Iq) 2.6 mA
Current - Supply (Max) 14 mA
PSRR 117dB ~ 56dB (120Hz ~ 10MHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Operating Temperature -40°C ~ 125°C (TJ)
Mounting Type Surface Mount
Package / Case 12-TSSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package 12-MSOP-EP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

XinYun Electronics Parts in Stock

Request a Quote

Need LT3040IMSE#PBF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.