LP3964ES-3.3 Rochester Electronics component image

LP3964ES-3.3

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LINEAR 3.3V 800MA DDPAK

Listed in PMIC - Voltage Regulators - Linear

2,737 pcs in stock ships same day before 6pm

from $1.8500

Quantity Unit Price
1+ $1.8500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP3964ES-3.3?

LP3964ES-3-3 is a ic reg linear 3.3v 800ma ddpak, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
LP3961ES-5.0/NOPB IC REG LIN 5V 800MA DDPAK/TO263 1,861 RFQ In Stock
LP3964ET-1.8/NOPB IC REG LINEAR 1.8V 800MA TO220-5 3,253 RFQ In Stock
LP3961EMP-1.8/NOPB IC REG LIN 1.8V 800MA SOT223-5 1,773 $2.8700 In Stock
LP3961ES-3.3 IC REG LINEAR 3.3V 800MA DDPAK 4,318 RFQ In Stock
LP3961ET-5.0/NOPB IC REG LINEAR 5V 800MA TO220-5 798 RFQ In Stock
LP3961ESX-3.3/NOPB IC REG LINEAR 3.3V 800MA DDPAK 2,752 $1.8388 In Stock
LP3964EMP-1.8/NOPB IC REG LIN 1.8V 800MA SOT223-5 1,775 $2.8700 In Stock
LP3964ET-2.5 IC REG LINEAR 2.5V 800MA TO220-5 4,932 RFQ In Stock
LP3964ESX-3.3 IC REG LINEAR 3.3V 800MA DDPAK 1,885 RFQ In Stock
LP3964ET-ADJ/NOPB IC REG LIN POS ADJ 800MA TO220-5 1,538 $3.3400 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

LP3964ES-3.3 Specifications

Series -
Package Tube
Part Status Obsolete
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 7V
Voltage - Output (Min/Fixed) 3.3V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.35V @ 800mA
Current - Output 800mA
Current - Quiescent (Iq) 9 mA
Current - Supply (Max) 15 mA
PSRR -
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package DDPAK/TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need LP3964ES-3.3 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.