LP3963ES-2.5 Rochester Electronics component image

LP3963ES-2.5

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LIN 2.5V 3A DDPAK/TO263-5

Listed in PMIC - Voltage Regulators - Linear

2,152 pcs in stock ships same day before 6pm

from $2.3600

Quantity Unit Price
1 - 134 $2.3600 BEST
135+ $2.3600 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP3963ES-2.5?

LP3963ES-2-5 is a ic reg lin 2.5v 3a ddpak/to263-5, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

29 variants of this series in stock
Part Number Description Stock Unit Price Status
LP3966ET-5.0/NOPB IC REG LINEAR 5V 3A TO220-5 704 RFQ In Stock
LP3966ET-3.3/NOPB IC REG LINEAR 3.3V 3A TO220-5 811 RFQ In Stock
LP3966ES-ADJ/NOPB IC REG LINEAR POS ADJ 3A DDPAK 932 $5.5600 In Stock
LP3966ESX-1.8/NOPB IC REG LIN 1.8V 3A DDPAK/TO263-5 1,122 $4.6300 In Stock
LP3966ESX-3.3 IC REG LIN 3.3V 3A DDPAK/TO263-5 1,548 RFQ In Stock
LP3963ESX-2.5/NOPB IC REG LIN 2.5V 3A DDPAK/TO263-5 1,236 $4.1700 In Stock
LP3963ET-3.3/NOPB IC REG LINEAR 3.3V 3A TO220-5 4,143 RFQ In Stock
LP3966ESX-5.0 IC REG LIN 5V 3A DDPAK/TO263-5 3,371 RFQ In Stock
LP3963ET-5.0/NOPB IC REG LINEAR 5V 3A TO220-5 2,025 RFQ In Stock
LP3963ESX-5.0 IC REG LIN 5V 3A DDPAK/TO263-5 2,969 RFQ In Stock
+ 19 more variants in stock — browse the full category

Technical Parameters

LP3963ES-2.5 Specifications

Series -
Package Tube
Part Status Obsolete
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 7V
Voltage - Output (Min/Fixed) 2.5V
Voltage - Output (Max) -
Voltage Dropout (Max) 1.2V @ 3A
Current - Output 3A
Current - Quiescent (Iq) 9 mA
Current - Supply (Max) 15 mA
PSRR -
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package DDPAK/TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need LP3963ES-2.5 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.