LP3961ES-2.5 Rochester Electronics component image

LP3961ES-2.5

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LINEAR 2.5V 800MA DDPAK

Listed in PMIC - Voltage Regulators - Linear

2,700 pcs in stock ships same day before 6pm

from $1.8800

Quantity Unit Price
1 - 179 $1.8800 BEST
180+ $1.8800 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP3961ES-2.5?

LP3961ES-2-5 is a ic reg linear 2.5v 800ma ddpak, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

14 variants of this series in stock
Part Number Description Stock Unit Price Status
LP3961EMP-3.3 IC REG LINEAR FIXED POS LDO 3.3V 2,396 $2.1200 In Stock
LP3961EMPX-1.8 IC REG LINEAR FIXED POS LDO REG 3,129 $1.6200 In Stock
LP3961EMPX-3.3/NOPB IC REG LINEAR 3.3V 800MA SOT223 4,390 $1.1500 In Stock
LP3964ESX-1.8 IC REG LINEAR 1.8V 800MA DDPAK 7,192 $0.7000 In Stock
LP3961EMPX-2.5 IC REG LINEAR FIXED POS LDO REG 3,668 $1.3800 In Stock
LP3964EMPX-ADJ IC REG LIN POS ADJ 800MA SOT223 3,653 $1.3800 In Stock
LP3964ES-2.5 IC REG LINEAR 2.5V 800MA DDPAK 2,752 $1.8400 In Stock
LP3964ET-ADJ IC REG LIN POS ADJ 800MA TO220-5 2,751 $1.8500 In Stock
LP3961EMP-5.0 IC REG LINEAR FIXED POS LDO 5V 2,392 $2.1200 In Stock
LP3961ESX-2.5 IC REG LINEAR FIXED POS LDO REG 7,184 $0.7000 In Stock
+ 4 more variants in stock — browse the full category

Technical Parameters

LP3961ES-2.5 Specifications

Series -
Package Bulk
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 7V
Voltage - Output (Min/Fixed) 2.5V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.35V @ 800mA
Current - Output 800mA
Current - Quiescent (Iq) 9 mA
Current - Supply (Max) 15 mA
PSRR -
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C (TJ)
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package DDPAK/TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need LP3961ES-2.5 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.