LP3893ES-1.2/NOPB Texas Instruments component image

LP3893ES-1.2/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LIN 1.2V 3A DDPAK/TO263-5

Listed in PMIC - Voltage Regulators - Linear

844 pcs in stock ships same day before 6pm

from $3.1295

Quantity Unit Price
1 - 9 $6.2400
10 - 44 $5.6001
45 - 134 $5.2943
135 - 539 $4.5883
540 - 1,034 $3.9059
1,035 - 2,519 $3.2942
2,520+ $3.1295 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP3893ES-1.2/NOPB?

LP3893ES-1-2-NOPB is a ic reg lin 1.2v 3a ddpak/to263-5, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
LP3893ESX-1.8/NOPB IC REG LIN 1.8V 3A DDPAK/TO263-5 2,723 RFQ In Stock
LP3893ET-1.2/NOPB IC REG LINEAR 1.2V 3A TO220-5 1,431 RFQ In Stock
LP3893ESX-1.2/NOPB IC REG LIN 1.2V 3A DDPAK/TO263-3 1,006 $5.2000 In Stock
LP3893ET-1.8/NOPB IC REG LINEAR 1.8V 3A TO220-5 814 RFQ In Stock
LP3893ESX-1.5/NOPB IC REG LIN 1.5V 3A DDPAK/TO263-5 1,857 RFQ In Stock
LP3893ET-1.5/NOPB IC REG LINEAR 1.5V 3A TO220-5 2,391 RFQ In Stock
LP3893ES-1.8/NOPB IC REG LIN 1.8V 3A DDPAK/TO263-5 670 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LP3893ES-1.2/NOPB Specifications

Series -
Package Tube
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 5.5V
Voltage - Output (Min/Fixed) 1.2V
Voltage - Output (Max) -
Voltage Dropout (Max) 1V @ 1A
Current - Output 3A
Current - Quiescent (Iq) 30 µA
Current - Supply (Max) 8 mA
PSRR 80dB ~ 65dB (120Hz ~ 1kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package DDPAK/TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LP3893ES-1.2/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.