LP3892ES-1.2/NOPB Texas Instruments component image

LP3892ES-1.2/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LINEAR 1.2V 1.5A DDPAK

Listed in PMIC - Voltage Regulators - Linear

1,063 pcs in stock ships same day before 6pm

from $2.4548

Quantity Unit Price
1 - 9 $4.8900
10 - 44 $4.3925
45 - 134 $4.1529
135 - 539 $3.5991
540 - 1,034 $3.0638
1,035 - 2,519 $2.5840
2,520+ $2.4548 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP3892ES-1.2/NOPB?

LP3892ES-1-2-NOPB is a ic reg linear 1.2v 1.5a ddpak, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

20 variants of this series in stock
Part Number Description Stock Unit Price Status
LP3892ET-1.8/NOPB IC REG LINEAR 1.8V 1.5A TO220-5 1,106 RFQ In Stock
LP3892EMR-1.2 IC REG LIN 1.2V 1.5A 8SO PWRPAD 1,808 RFQ In Stock
LP3892ES-1.8/NOPB IC REG LINEAR 1.8V 1.5A DDPAK 4,222 RFQ In Stock
LP3892EMRX-1.2 IC REG LIN 1.2V 1.5A 8SO PWRPAD 3,984 RFQ In Stock
LP3892EMRX-1.8 IC REG LIN 1.8V 1.5A 8SO PWRPAD 1,216 RFQ In Stock
LP3892ET-1.5/NOPB IC REG LINEAR 1.5V 1.5A TO220-5 960 RFQ In Stock
LP3892EMR-1.5/NOPB IC REG LIN 1.5V 1.5A 8SO PWRPAD 1,090 $4.7200 In Stock
LP3892ESX-1.2/NOPB IC REG LINEAR 1.2V 1.5A DDPAK 1,254 $4.1000 In Stock
LP3892ESX-1.2 IC REG LINEAR 1.2V 1.5A DDPAK 1,033 RFQ In Stock
LP3892ESX-1.8/NOPB IC REG LINEAR 1.8V 1.5A DDPAK 901 RFQ In Stock
+ 10 more variants in stock — browse the full category

Technical Parameters

LP3892ES-1.2/NOPB Specifications

Series -
Package Tube
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 5.5V
Voltage - Output (Min/Fixed) 1.2V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.50V @ 1.5A
Current - Output 1.5A
Current - Quiescent (Iq) 30 µA
Current - Supply (Max) 8 mA
PSRR 80dB ~ 65dB (120Hz ~ 1kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package DDPAK/TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LP3892ES-1.2/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.