LP38851T-ADJ/NOPB Texas Instruments component image

LP38851T-ADJ/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LIN POS ADJ 800MA TO220-7

Listed in PMIC - Voltage Regulators - Linear

2,291 pcs in stock ships same day before 6pm

from $1.6064

Quantity Unit Price
1 - 9 $2.2200
10 - 44 $1.9991
45 - 134 $1.8855
135+ $1.6064 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP38851T-ADJ/NOPB?

LP38851T-ADJ-NOPB is a ic reg lin pos adj 800ma to220-7, featuring the TO-220-7 (Formed Leads) package, Through Hole mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Texas Instruments Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
LP38851T-ADJ IC REG LIN POS ADJ 800MA TO220-7 1,272 RFQ In Stock
LP38851S-ADJ IC REG LIN POS ADJ 800MA DDPAK 3,882 RFQ In Stock
LP38851MRX-ADJ/NOPB IC REG LIN POS ADJ 800MA 8SO 2,294 $2.2200 In Stock
LP38851SX-ADJ IC REG LIN POS ADJ 800MA DDPAK 1,691 RFQ In Stock
LP38851S-ADJ/NOPB IC REG LIN POS ADJ 800MA DDPAK 2,813 $1.8063 In Stock
LP38851SX-ADJ/NOPB IC REG LIN POS ADJ 800MA DDPAK 2,300 $2.2200 In Stock
LP38851MR-ADJ/NOPB IC REG LIN POS ADJ 800MA 8SO 1,911 $2.6600 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LP38851T-ADJ/NOPB Specifications

Series -
Package Tube
Part Status Active
Output Configuration Positive
Output Type Adjustable
Number of Regulators 1
Voltage - Input (Max) 5.5V
Voltage - Output (Min/Fixed) 0.8V
Voltage - Output (Max) 1.8V
Voltage Dropout (Max) 0.2V @ 800mA
Current - Output 800mA
Current - Quiescent (Iq) 300 µA
Current - Supply (Max) 9 mA
PSRR 72dB ~ 61dB (120Hz ~ 1kHz)
Control Features Enable, Soft Start
Protection Features Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
Operating Temperature -40°C ~ 125°C
Mounting Type Through Hole
Package / Case TO-220-7 (Formed Leads)
Supplier Device Package TO-220-7

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LP38851T-ADJ/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.