LP38842MR-ADJ/NOPB Texas Instruments component image

LP38842MR-ADJ/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LIN POS ADJ 1.5A 8SO

Listed in PMIC - Voltage Regulators - Linear

1,513 pcs in stock ships same day before 6pm

from $1.6278

Quantity Unit Price
1 - 9 $3.3700
10 - 94 $3.0266
95 - 189 $2.8613
190 - 569 $2.4798
570 - 1,044 $2.1110
1,045 - 2,564 $1.7804
2,565 - 5,034 $1.6914
5,035+ $1.6278 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP38842MR-ADJ/NOPB?

LP38842MR-ADJ-NOPB is a ic reg lin pos adj 1.5a 8so, featuring the 8-PowerSOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

4 variants of this series in stock
Part Number Description Stock Unit Price Status
LP38842MR-ADJ IC REG LIN POS ADJ 1.5A 8SO 3,975 RFQ In Stock
LP38842MRX-ADJ IC REG LIN POS ADJ 1.5A 8SO 2,605 RFQ In Stock
LP38842MRX-ADJ/NOPB IC REG LIN POS ADJ 1.5A 8SO 3,721 $1.3582 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LP38842MR-ADJ/NOPB Specifications

Series -
Package Tube
Part Status Active
Output Configuration Positive
Output Type Adjustable
Number of Regulators 1
Voltage - Input (Max) 5.5V
Voltage - Output (Min/Fixed) 0.56V
Voltage - Output (Max) 1.5V
Voltage Dropout (Max) 0.115V @ 1.5A
Current - Output 1.5A
Current - Quiescent (Iq) 30 µA
Current - Supply (Max) 40 mA
PSRR 58dB ~ 80dB (120Hz ~ 1kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-PowerSOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SO PowerPad

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LP38842MR-ADJ/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.