LP3881ES-1.5/NOPB Texas Instruments component image

LP3881ES-1.5/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LINEAR 1.5V 800MA DDPAK

Listed in PMIC - Voltage Regulators - Linear

1,069 pcs in stock ships same day before 6pm

from $4.8097

Quantity Unit Price
1 - 134 $4.8368
135+ $4.8097 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP3881ES-1.5/NOPB?

LP3881ES-1-5-NOPB is a ic reg linear 1.5v 800ma ddpak, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

18 variants of this series in stock
Part Number Description Stock Unit Price Status
LP3881ET-1.2/NOPB IC REG LINEAR 1.2V 800MA TO220-5 4,087 RFQ In Stock
LP3881EMRX-1.2/NOPB IC REG LIN 1.2V 800MA 8SO PWRPAD 2,147 RFQ In Stock
LP3881ES-1.2/NOPB IC REG LINEAR 1.2V 800MA DDPAK 791 $6.5700 In Stock
LP3881ESX-1.8/NOPB IC REG LINEAR 1.8V 800MA DDPAK 954 $5.4800 In Stock
LP3881EMR-1.5/NOPB IC REG LIN 1.5V 800MA 8SO PWRPAD 3,771 RFQ In Stock
LP3881EMRX-1.5 IC REG LIN 1.5V 800MA 8SO PWRPAD 3,765 RFQ In Stock
LP3881ET-1.5/NOPB IC REG LINEAR 1.5V 800MA TO220-5 4,628 RFQ In Stock
LP3881EMR-1.8/NOPB IC REG LIN 1.8V 800MA 8SO PWRPAD 3,347 RFQ In Stock
LP3881ET-1.8/NOPB IC REG LINEAR 1.8V 800MA TO220-5 4,810 RFQ In Stock
LP3874ESX-1.8 IC REG LINEAR 1.8V 800MA DDPAK 2,413 RFQ In Stock
+ 8 more variants in stock — browse the full category

Technical Parameters

LP3881ES-1.5/NOPB Specifications

Series -
Package Tube
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 5.5V
Voltage - Output (Min/Fixed) 1.5V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.16V @ 800mA
Current - Output 800mA
Current - Quiescent (Iq) 30 µA
Current - Supply (Max) 8 mA
PSRR 80dB ~ 65dB (120Hz ~ 1kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package DDPAK/TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LP3881ES-1.5/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.