LP3875ESX-2.5 Rochester Electronics component image

LP3875ESX-2.5

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LINEAR FIXED POS LDO REG

Listed in PMIC - Voltage Regulators - Linear

5,408 pcs in stock ships same day before 6pm

from $0.9300

Quantity Unit Price
1+ $0.9300 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP3875ESX-2.5?

LP3875ESX-2-5 is a ic reg linear fixed pos ldo reg, featuring the TO-263-6, D²Pak (5 Leads + Tab), TO-263BA package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Rochester Electronics Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
LP3875EMP-5.0 IC REG LINEAR 5V 1.5A SOT223 3,255 $1.5600 In Stock
LP3872EMP-5.0 IC REG LINEAR FIXED POS LDO REG 2,576 $1.9700 In Stock
LP3875ET-5.0/NOPB IC REG LINEAR 5V 1.5A TO220-5 5,411 $0.9300 In Stock
LP3872EMP-3.3 IC REG LINEAR 3.3V 1.5A SOT223 3,025 $1.6800 In Stock
LP3872ET-3.3 IC REG LINEAR FIXED LDO REG 5,424 $0.9300 In Stock
LP3872EMPX-2.5/NOPB IC REG LINEAR 2.5V 1.5A SOT223-5 2,749 $1.8400 In Stock
LP3875ET-1.8 IC REG LINEAR FIXED LDO REG 5,411 $0.9300 In Stock
LP3875ET-5.0 IC REG LINEAR FIXED LDO REG 5,412 $0.9300 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LP3875ESX-2.5 Specifications

Series -
Package Bulk
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 7V
Voltage - Output (Min/Fixed) 2.5V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.55V @ 1.5A
Current - Output 1.5A
Current - Quiescent (Iq) 5 mA
Current - Supply (Max) 15 mA
PSRR 73dB ~ 57dB (120Hz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Supplier Device Package DDPAK/TO-263-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need LP3875ESX-2.5 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.