LP38692MPX-5.0 Rochester Electronics component image

LP38692MPX-5.0

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LINEAR FIXED POS LDO REG

Listed in PMIC - Voltage Regulators - Linear

9,470 pcs in stock ships same day before 6pm

from $0.5300

Quantity Unit Price
1+ $0.5300 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP38692MPX-5.0?

LP38692MPX-5-0 is a ic reg linear fixed pos ldo reg, featuring the TO-261-5, TO-261AB package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Rochester Electronics Series Variants in Stock

12 variants of this series in stock
Part Number Description Stock Unit Price Status
LP38690SDX-2.5 IC REG LINEAR 2.5V 1A 6WSON 6,975 $0.7200 In Stock
LP38690DTX-3.3/NOPB LP38690 1A LOW DROPOUT CMOS LINE 6,291 $0.8000 In Stock
LP38692MPX-1.8 IC REG LINEAR FIXED POS LDO REG 13,928 $0.3600 In Stock
LP38690DT-3.3 IC REG LINEAR FIXED POS LDO 3.3V 4,167 $1.2100 In Stock
LP38690DT-1.8 IC REG LINEAR 1.8V 1A TO252-3 9,477 $0.5300 In Stock
LP38692MP-1.8 IC REG LINEAR 1.8V 1A SOT223 7,082 $0.7100 In Stock
LP38692SD-1.8 IC REG LINEAR FIXED POS LDO REG 7,085 $0.7100 In Stock
LP38690SD-3.3/NOPB LP38690 1A LOW DROPOUT CMOS LINE 7,288 $0.6900 In Stock
LP38690DT-3.3/NOPB LP38690 1A LOW DROPOUT CMOS LINE 5,407 $0.9300 In Stock
LP38692SD-2.5 IC REG LINEAR FIXED POS LDO REG 5,925 $0.8500 In Stock
+ 2 more variants in stock — browse the full category

Technical Parameters

LP38692MPX-5.0 Specifications

Series -
Package Bulk
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 10V
Voltage - Output (Min/Fixed) 5V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.8V @ 1A
Current - Output 1A
Current - Quiescent (Iq) 55 µA
Current - Supply (Max) 100 µA
PSRR 55dB (120Hz)
Control Features -
Protection Features Over Temperature
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-261-5, TO-261AB
Supplier Device Package SOT-223-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need LP38692MPX-5.0 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.