LP38691DT-2.5 Texas Instruments component image

LP38691DT-2.5

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LINEAR 2.5V 500MA TO252-3

Listed in PMIC - Voltage Regulators - Linear

6,373 pcs in stock ships same day before 6pm

from $0.7900

Quantity Unit Price
1+ $0.7900 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP38691DT-2.5?

LP38691DT-2-5 is a ic reg linear 2.5v 500ma to252-3, featuring the TO-252-3, DPak (2 Leads + Tab), SC-63 package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

23 variants of this series in stock
Part Number Description Stock Unit Price Status
LP38693MPX-2.5 IC REG LIN 2.5V 500MA SOT223-5 4,201 RFQ In Stock
LP38693MP-1.8 IC REG LIN 1.8V 500MA SOT223-5 1,600 RFQ In Stock
LP38693MPX-1.8 IC REG LIN 1.8V 500MA SOT223-5 2,028 RFQ In Stock
LP38691SDX-5.0 IC REG LINEAR 5V 500MA 6WSON 2,663 RFQ In Stock
LP38693SDX-5.0 IC REG LINEAR 5V 500MA 6WSON 2,145 RFQ In Stock
LP38693MP-5.0 IC REG LINEAR 5V 500MA SOT223-5 4,875 RFQ In Stock
LP38693SDX-1.8/NOPB IC REG LINEAR 1.8V 500MA 6WSON 879 RFQ In Stock
LP38693SDX-1.8 IC REG LINEAR 1.8V 500MA 6WSON 1,736 RFQ In Stock
LP38691SDX-2.5/NOPB IC REG LINEAR 2.5V 500MA 6WSON 4,827 RFQ In Stock
LP38691DTX-5.0 IC REG LINEAR 5V 500MA TO252-3 1,045 RFQ In Stock
+ 13 more variants in stock — browse the full category

Technical Parameters

LP38691DT-2.5 Specifications

Series -
Package Tube
Part Status Obsolete
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 10V
Voltage - Output (Min/Fixed) 2.5V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.73V @ 500mA
Current - Output 500mA
Current - Quiescent (Iq) 55 µA
Current - Supply (Max) 100 µA
PSRR 55dB (120Hz)
Control Features -
Protection Features Over Temperature
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package TO-252-3

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LP38691DT-2.5 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.